From 630e1b870fc38f4f11f5d6ff5bb61f3bb735c577 Mon Sep 17 00:00:00 2001 From: KatolaZ Date: Sat, 31 Dec 2016 00:07:11 +0000 Subject: debian-package --- debian_package/setnet-0.1/debian/README.Debian | 21 + debian_package/setnet-0.1/debian/README.source | 10 + debian_package/setnet-0.1/debian/changelog | 5 + debian_package/setnet-0.1/debian/compat | 1 + debian_package/setnet-0.1/debian/control | 17 + debian_package/setnet-0.1/debian/copyright | 21 + .../setnet-0.1/debian/debhelper-build-stamp | 1 + debian_package/setnet-0.1/debian/files | 1 + debian_package/setnet-0.1/debian/init.d.ex | 26 + debian_package/setnet-0.1/debian/install | 3 + debian_package/setnet-0.1/debian/manpage.1.ex | 56 + debian_package/setnet-0.1/debian/manpage.sgml.ex | 154 +++ debian_package/setnet-0.1/debian/manpage.xml.ex | 291 +++++ debian_package/setnet-0.1/debian/menu.ex | 2 + debian_package/setnet-0.1/debian/postinst.ex | 39 + debian_package/setnet-0.1/debian/postrm.ex | 37 + debian_package/setnet-0.1/debian/preinst.ex | 35 + debian_package/setnet-0.1/debian/prerm.ex | 38 + debian_package/setnet-0.1/debian/rules | 25 + debian_package/setnet-0.1/debian/setnet-docs.docs | 2 + debian_package/setnet-0.1/debian/setnet.cron.d.ex | 4 + .../setnet-0.1/debian/setnet.debhelper.log | 19 + debian_package/setnet-0.1/debian/setnet.default.ex | 10 + .../setnet-0.1/debian/setnet.doc-base.EX | 20 + debian_package/setnet-0.1/debian/setnet.substvars | 2 + .../setnet-0.1/debian/setnet/DEBIAN/conffiles | 2 + .../setnet-0.1/debian/setnet/DEBIAN/control | 13 + .../setnet-0.1/debian/setnet/DEBIAN/md5sums | 4 + .../setnet-0.1/debian/setnet/etc/setnetrc | 19 + .../setnet/etc/wpa_supplicant/wpa_setnet.conf | 3 + .../setnet-0.1/debian/setnet/usr/sbin/setnet.sh | 1120 ++++++++++++++++++++ .../setnet/usr/share/doc/setnet/README.Debian | 21 + .../usr/share/doc/setnet/changelog.Debian.gz | Bin 0 -> 188 bytes .../debian/setnet/usr/share/doc/setnet/copyright | 21 + debian_package/setnet-0.1/debian/source/format | 1 + debian_package/setnet-0.1/debian/watch.ex | 39 + debian_package/setnet-0.1/setnet.sh | 1120 ++++++++++++++++++++ debian_package/setnet-0.1/setnetrc | 19 + debian_package/setnet-0.1/wpa_setnet.conf | 3 + debian_package/setnet_0.1-1.debian.tar.xz | Bin 0 -> 8192 bytes debian_package/setnet_0.1-1.dsc | 20 + debian_package/setnet_0.1-1_all.deb | Bin 0 -> 8332 bytes debian_package/setnet_0.1-1_amd64.changes | 31 + debian_package/setnet_0.1.orig.tar.xz | Bin 0 -> 14092 bytes 44 files changed, 3276 insertions(+) create mode 100644 debian_package/setnet-0.1/debian/README.Debian create mode 100644 debian_package/setnet-0.1/debian/README.source create mode 100644 debian_package/setnet-0.1/debian/changelog create mode 100644 debian_package/setnet-0.1/debian/compat create mode 100644 debian_package/setnet-0.1/debian/control create mode 100644 debian_package/setnet-0.1/debian/copyright create mode 100644 debian_package/setnet-0.1/debian/debhelper-build-stamp create mode 100644 debian_package/setnet-0.1/debian/files create mode 100644 debian_package/setnet-0.1/debian/init.d.ex create mode 100644 debian_package/setnet-0.1/debian/install create mode 100644 debian_package/setnet-0.1/debian/manpage.1.ex create mode 100644 debian_package/setnet-0.1/debian/manpage.sgml.ex create mode 100644 debian_package/setnet-0.1/debian/manpage.xml.ex create mode 100644 debian_package/setnet-0.1/debian/menu.ex create mode 100644 debian_package/setnet-0.1/debian/postinst.ex create mode 100644 debian_package/setnet-0.1/debian/postrm.ex create mode 100644 debian_package/setnet-0.1/debian/preinst.ex create mode 100644 debian_package/setnet-0.1/debian/prerm.ex create mode 100755 debian_package/setnet-0.1/debian/rules create mode 100644 debian_package/setnet-0.1/debian/setnet-docs.docs create mode 100644 debian_package/setnet-0.1/debian/setnet.cron.d.ex create mode 100644 debian_package/setnet-0.1/debian/setnet.debhelper.log create mode 100644 debian_package/setnet-0.1/debian/setnet.default.ex create mode 100644 debian_package/setnet-0.1/debian/setnet.doc-base.EX create mode 100644 debian_package/setnet-0.1/debian/setnet.substvars create mode 100644 debian_package/setnet-0.1/debian/setnet/DEBIAN/conffiles create mode 100644 debian_package/setnet-0.1/debian/setnet/DEBIAN/control create mode 100644 debian_package/setnet-0.1/debian/setnet/DEBIAN/md5sums create mode 100644 debian_package/setnet-0.1/debian/setnet/etc/setnetrc create mode 100644 debian_package/setnet-0.1/debian/setnet/etc/wpa_supplicant/wpa_setnet.conf create mode 100755 debian_package/setnet-0.1/debian/setnet/usr/sbin/setnet.sh create mode 100644 debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/README.Debian create mode 100644 debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/changelog.Debian.gz create mode 100644 debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/copyright create mode 100644 debian_package/setnet-0.1/debian/source/format create mode 100644 debian_package/setnet-0.1/debian/watch.ex create mode 100755 debian_package/setnet-0.1/setnet.sh create mode 100644 debian_package/setnet-0.1/setnetrc create mode 100644 debian_package/setnet-0.1/wpa_setnet.conf create mode 100644 debian_package/setnet_0.1-1.debian.tar.xz create mode 100644 debian_package/setnet_0.1-1.dsc create mode 100644 debian_package/setnet_0.1-1_all.deb create mode 100644 debian_package/setnet_0.1-1_amd64.changes create mode 100644 debian_package/setnet_0.1.orig.tar.xz diff --git a/debian_package/setnet-0.1/debian/README.Debian b/debian_package/setnet-0.1/debian/README.Debian new file mode 100644 index 0000000..7c41578 --- /dev/null +++ b/debian_package/setnet-0.1/debian/README.Debian @@ -0,0 +1,21 @@ +setnet for Debian +---------------- + +setnet is a simple bash+dialog tool to congfigure ethernet and wifi networks. +It is still at alpha stage, so you should use it AT YOUR OWN RISK. + + +=== USAGE === + +setnet is installed under /usr/sbin/setnet.sh and by default it uses the file +/etc/setnetrc for configuration. There are currently only two defined variables +in setnetrc, namely + + - WPA_FILE + This is the file configuration file used by wpa_supplicant + - LOGNAME + This is the file where logs will be put + + + + -- Vincenzo (KatolaZ) Nicosia Fri, 30 Dec 2016 16:06:26 +0000 diff --git a/debian_package/setnet-0.1/debian/README.source b/debian_package/setnet-0.1/debian/README.source new file mode 100644 index 0000000..46b1c87 --- /dev/null +++ b/debian_package/setnet-0.1/debian/README.source @@ -0,0 +1,10 @@ +setnet for Debian +---------------- + + + + + + -- Vincenzo (KatolaZ) Nicosia Fri, 30 Dec 2016 16:06:26 +0000 + diff --git a/debian_package/setnet-0.1/debian/changelog b/debian_package/setnet-0.1/debian/changelog new file mode 100644 index 0000000..1c9d39b --- /dev/null +++ b/debian_package/setnet-0.1/debian/changelog @@ -0,0 +1,5 @@ +setnet (0.1-1) unstable; urgency=medium + + * Initial release (Closes: #nnnn) + + -- Vincenzo (KatolaZ) Nicosia Fri, 30 Dec 2016 16:06:26 +0000 diff --git a/debian_package/setnet-0.1/debian/compat b/debian_package/setnet-0.1/debian/compat new file mode 100644 index 0000000..ec63514 --- /dev/null +++ b/debian_package/setnet-0.1/debian/compat @@ -0,0 +1 @@ +9 diff --git a/debian_package/setnet-0.1/debian/control b/debian_package/setnet-0.1/debian/control new file mode 100644 index 0000000..256ad38 --- /dev/null +++ b/debian_package/setnet-0.1/debian/control @@ -0,0 +1,17 @@ +Source: setnet +Section: unknown +Priority: optional +Maintainer: Vincenzo (KatolaZ) Nicosia +Build-Depends: debhelper (>=9) +Standards-Version: 3.9.8 +Homepage: http://kalos.mine.nu/setnet +#Vcs-Git: git://anonscm.debian.org/collab-maint/setnet.git +#Vcs-Browser: https://anonscm.debian.org/cgit/collab-maint/setnet.git + +Package: setnet +Architecture: all +Depends: ${shlibs:Depends}, ${misc:Depends}, bash, dialog, iproute2, dhclient +Suggests: wpasupplicant +Description: simple bash+dialog tool to configure networks + setnet is a relatively simple bash+dialog tool to configure ethernet + and wifi connections. diff --git a/debian_package/setnet-0.1/debian/copyright b/debian_package/setnet-0.1/debian/copyright new file mode 100644 index 0000000..f425891 --- /dev/null +++ b/debian_package/setnet-0.1/debian/copyright @@ -0,0 +1,21 @@ +Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ +Upstream-Name: setnet +Source: + +Files: debian/* +Copyright: 2016 Vincenzo (KatolaZ) Nicosia +License: GPL-3+ + This package is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + . + This package is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + . + You should have received a copy of the GNU General Public License + along with this program. If not, see + . + diff --git a/debian_package/setnet-0.1/debian/debhelper-build-stamp b/debian_package/setnet-0.1/debian/debhelper-build-stamp new file mode 100644 index 0000000..c166bc0 --- /dev/null +++ b/debian_package/setnet-0.1/debian/debhelper-build-stamp @@ -0,0 +1 @@ +setnet diff --git a/debian_package/setnet-0.1/debian/files b/debian_package/setnet-0.1/debian/files new file mode 100644 index 0000000..149e7b2 --- /dev/null +++ b/debian_package/setnet-0.1/debian/files @@ -0,0 +1 @@ +setnet_0.1-1_all.deb unknown optional diff --git a/debian_package/setnet-0.1/debian/init.d.ex b/debian_package/setnet-0.1/debian/init.d.ex new file mode 100644 index 0000000..08360e2 --- /dev/null +++ b/debian_package/setnet-0.1/debian/init.d.ex @@ -0,0 +1,26 @@ +#!/bin/sh +# kFreeBSD do not accept scripts as interpreters, using #!/bin/sh and sourcing. +if [ true != "$INIT_D_SCRIPT_SOURCED" ] ; then + set "$0" "$@"; INIT_D_SCRIPT_SOURCED=true . /lib/init/init-d-script +fi +### BEGIN INIT INFO +# Provides: setnet +# Required-Start: $remote_fs $syslog +# Required-Stop: $remote_fs $syslog +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: +# Description: +# <...> +# <...> +### END INIT INFO + +# Author: Vincenzo (KatolaZ) Nicosia + +DESC="setnet" +DAEMON=/usr/bin/setnet + +# This is an example to start a single forking daemon capable of writing +# a pid file. To get other behaviors, implement do_start(), do_stop() or +# other functions to override the defaults in /lib/init/init-d-script. +# See also init-d-script(5) diff --git a/debian_package/setnet-0.1/debian/install b/debian_package/setnet-0.1/debian/install new file mode 100644 index 0000000..7385031 --- /dev/null +++ b/debian_package/setnet-0.1/debian/install @@ -0,0 +1,3 @@ +setnet.sh /usr/sbin +setnetrc /etc/ +wpa_setnet.conf /etc/wpa_supplicant/ diff --git a/debian_package/setnet-0.1/debian/manpage.1.ex b/debian_package/setnet-0.1/debian/manpage.1.ex new file mode 100644 index 0000000..8c3ca6b --- /dev/null +++ b/debian_package/setnet-0.1/debian/manpage.1.ex @@ -0,0 +1,56 @@ +.\" Hey, EMACS: -*- nroff -*- +.\" (C) Copyright 2016 Vincenzo (KatolaZ) Nicosia , +.\" +.\" First parameter, NAME, should be all caps +.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection +.\" other parameters are allowed: see man(7), man(1) +.TH Setnet SECTION "December 30 2016" +.\" Please adjust this date whenever revising the manpage. +.\" +.\" Some roff macros, for reference: +.\" .nh disable hyphenation +.\" .hy enable hyphenation +.\" .ad l left justify +.\" .ad b justify to both left and right margins +.\" .nf disable filling +.\" .fi enable filling +.\" .br insert line break +.\" .sp insert n+1 empty lines +.\" for manpage-specific macros, see man(7) +.SH NAME +setnet \- program to do something +.SH SYNOPSIS +.B setnet +.RI [ options ] " files" ... +.br +.B bar +.RI [ options ] " files" ... +.SH DESCRIPTION +This manual page documents briefly the +.B setnet +and +.B bar +commands. +.PP +.\" TeX users may be more comfortable with the \fB\fP and +.\" \fI\fP escape sequences to invode bold face and italics, +.\" respectively. +\fBsetnet\fP is a program that... +.SH OPTIONS +These programs follow the usual GNU command line syntax, with long +options starting with two dashes (`-'). +A summary of options is included below. +For a complete description, see the Info files. +.TP +.B \-h, \-\-help +Show summary of options. +.TP +.B \-v, \-\-version +Show version of program. +.SH SEE ALSO +.BR bar (1), +.BR baz (1). +.br +The programs are documented fully by +.IR "The Rise and Fall of a Fooish Bar" , +available via the Info system. diff --git a/debian_package/setnet-0.1/debian/manpage.sgml.ex b/debian_package/setnet-0.1/debian/manpage.sgml.ex new file mode 100644 index 0000000..c87d8aa --- /dev/null +++ b/debian_package/setnet-0.1/debian/manpage.sgml.ex @@ -0,0 +1,154 @@ + manpage.1'. You may view + the manual page with: `docbook-to-man manpage.sgml | nroff -man | + less'. A typical entry in a Makefile or Makefile.am is: + +manpage.1: manpage.sgml + docbook-to-man $< > $@ + + + The docbook-to-man binary is found in the docbook-to-man package. + Please remember that if you create the nroff version in one of the + debian/rules file targets (such as build), you will need to include + docbook-to-man in your Build-Depends control field. + + --> + + + FIRSTNAME"> + SURNAME"> + + December 30 2016"> + + SECTION"> + katolaz@freaknet.org"> + + Setnet"> + + + Debian"> + GNU"> + GPL"> +]> + + + +
+ &dhemail; +
+ + &dhfirstname; + &dhsurname; + + + 2003 + &dhusername; + + &dhdate; + + + &dhucpackage; + + &dhsection; + + + &dhpackage; + + program to do something + + + + &dhpackage; + + + + + + + + DESCRIPTION + + This manual page documents briefly the + &dhpackage; and bar + commands. + + This manual page was written for the &debian; distribution + because the original program does not have a manual page. + Instead, it has documentation in the &gnu; + Info format; see below. + + &dhpackage; is a program that... + + + + OPTIONS + + These programs follow the usual &gnu; command line syntax, + with long options starting with two dashes (`-'). A summary of + options is included below. For a complete description, see the + Info files. + + + + + + + + Show summary of options. + + + + + + + + Show version of program. + + + + + + SEE ALSO + + bar (1), baz (1). + + The programs are documented fully by The Rise and + Fall of a Fooish Bar available via the + Info system. + + + AUTHOR + + This manual page was written by &dhusername; &dhemail; for + the &debian; system (and may be used by others). Permission is + granted to copy, distribute and/or modify this document under + the terms of the &gnu; General Public License, Version 2 any + later version published by the Free Software Foundation. + + + On Debian systems, the complete text of the GNU General Public + License can be found in /usr/share/common-licenses/GPL. + + + + + + diff --git a/debian_package/setnet-0.1/debian/manpage.xml.ex b/debian_package/setnet-0.1/debian/manpage.xml.ex new file mode 100644 index 0000000..ae9864a --- /dev/null +++ b/debian_package/setnet-0.1/debian/manpage.xml.ex @@ -0,0 +1,291 @@ + +.
will be generated. You may view the +manual page with: nroff -man .
| less'. A typical entry +in a Makefile or Makefile.am is: + +DB2MAN = /usr/share/sgml/docbook/stylesheet/xsl/docbook-xsl/manpages/docbook.xsl +XP = xsltproc -''-nonet -''-param man.charmap.use.subset "0" + +manpage.1: manpage.xml + $(XP) $(DB2MAN) $< + +The xsltproc binary is found in the xsltproc package. The XSL files are in +docbook-xsl. A description of the parameters you can use can be found in the +docbook-xsl-doc-* packages. Please remember that if you create the nroff +version in one of the debian/rules file targets (such as build), you will need +to include xsltproc and docbook-xsl in your Build-Depends control field. +Alternatively use the xmlto command/package. That will also automatically +pull in xsltproc and docbook-xsl. + +Notes for using docbook2x: docbook2x-man does not automatically create the +AUTHOR(S) and COPYRIGHT sections. In this case, please add them manually as + ... . + +To disable the automatic creation of the AUTHOR(S) and COPYRIGHT sections +read /usr/share/doc/docbook-xsl/doc/manpages/authors.html. This file can be +found in the docbook-xsl-doc-html package. + +Validation can be done using: `xmllint -''-noout -''-valid manpage.xml` + +General documentation about man-pages and man-page-formatting: +man(1), man(7), http://www.tldp.org/HOWTO/Man-Page/ + +--> + + + + + + + + + + + + + +]> + + + + &dhtitle; + &dhpackage; + + + &dhfirstname; + &dhsurname; + Wrote this manpage for the Debian system. +
+ &dhemail; +
+ + + + 2007 + &dhusername; + + + This manual page was written for the Debian system + (and may be used by others). + Permission is granted to copy, distribute and/or modify this + document under the terms of the GNU General Public License, + Version 2 or (at your option) any later version published by + the Free Software Foundation. + On Debian systems, the complete text of the GNU General Public + License can be found in + /usr/share/common-licenses/GPL. + + + + &dhucpackage; + &dhsection; + + + &dhpackage; + program to do something + + + + &dhpackage; + + + + + + + + + this + + + + + + + + this + that + + + + + &dhpackage; + + + + + + + + + + + + + + + + + + + DESCRIPTION + This manual page documents briefly the + &dhpackage; and bar + commands. + This manual page was written for the Debian distribution + because the original program does not have a manual page. + Instead, it has documentation in the GNU + info + 1 + format; see below. + &dhpackage; is a program that... + + + OPTIONS + The program follows the usual GNU command line syntax, + with long options starting with two dashes (`-'). A summary of + options is included below. For a complete description, see the + + info + 1 + files. + + + + + + + Does this and that. + + + + + + + Show summary of options. + + + + + + + Show version of program. + + + + + + FILES + + + /etc/foo.conf + + The system-wide configuration file to control the + behaviour of &dhpackage;. See + + foo.conf + 5 + for further details. + + + + ${HOME}/.foo.conf + + The per-user configuration file to control the + behaviour of &dhpackage;. See + + foo.conf + 5 + for further details. + + + + + + ENVIRONMENT + + + FOO_CONF + + If used, the defined file is used as configuration + file (see also ). + + + + + + DIAGNOSTICS + The following diagnostics may be issued + on stderr: + + + Bad configuration file. Exiting. + + The configuration file seems to contain a broken configuration + line. Use the option, to get more info. + + + + + &dhpackage; provides some return codes, that can + be used in scripts: + + Code + Diagnostic + + 0 + Program exited successfully. + + + 1 + The configuration file seems to be broken. + + + + + + BUGS + The program is currently limited to only work + with the foobar library. + The upstreams BTS can be found + at . + + + SEE ALSO + + + bar + 1 + , + baz + 1 + , + foo.conf + 5 + + The programs are documented fully by The Rise and + Fall of a Fooish Bar available via the + info + 1 + system. + + + diff --git a/debian_package/setnet-0.1/debian/menu.ex b/debian_package/setnet-0.1/debian/menu.ex new file mode 100644 index 0000000..3f6b8bb --- /dev/null +++ b/debian_package/setnet-0.1/debian/menu.ex @@ -0,0 +1,2 @@ +?package(setnet):needs="X11|text|vc|wm" section="Applications/see-menu-manual"\ + title="setnet" command="/usr/bin/setnet" diff --git a/debian_package/setnet-0.1/debian/postinst.ex b/debian_package/setnet-0.1/debian/postinst.ex new file mode 100644 index 0000000..63f6b54 --- /dev/null +++ b/debian_package/setnet-0.1/debian/postinst.ex @@ -0,0 +1,39 @@ +#!/bin/sh +# postinst script for setnet +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `configure' +# * `abort-upgrade' +# * `abort-remove' `in-favour' +# +# * `abort-remove' +# * `abort-deconfigure' `in-favour' +# `removing' +# +# for details, see https://www.debian.org/doc/debian-policy/ or +# the debian-policy package + + +case "$1" in + configure) + ;; + + abort-upgrade|abort-remove|abort-deconfigure) + ;; + + *) + echo "postinst called with unknown argument \`$1'" >&2 + exit 1 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 diff --git a/debian_package/setnet-0.1/debian/postrm.ex b/debian_package/setnet-0.1/debian/postrm.ex new file mode 100644 index 0000000..14fe7e0 --- /dev/null +++ b/debian_package/setnet-0.1/debian/postrm.ex @@ -0,0 +1,37 @@ +#!/bin/sh +# postrm script for setnet +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `remove' +# * `purge' +# * `upgrade' +# * `failed-upgrade' +# * `abort-install' +# * `abort-install' +# * `abort-upgrade' +# * `disappear' +# +# for details, see https://www.debian.org/doc/debian-policy/ or +# the debian-policy package + + +case "$1" in + purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear) + ;; + + *) + echo "postrm called with unknown argument \`$1'" >&2 + exit 1 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 diff --git a/debian_package/setnet-0.1/debian/preinst.ex b/debian_package/setnet-0.1/debian/preinst.ex new file mode 100644 index 0000000..09a88b6 --- /dev/null +++ b/debian_package/setnet-0.1/debian/preinst.ex @@ -0,0 +1,35 @@ +#!/bin/sh +# preinst script for setnet +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `install' +# * `install' +# * `upgrade' +# * `abort-upgrade' +# for details, see https://www.debian.org/doc/debian-policy/ or +# the debian-policy package + + +case "$1" in + install|upgrade) + ;; + + abort-upgrade) + ;; + + *) + echo "preinst called with unknown argument \`$1'" >&2 + exit 1 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 diff --git a/debian_package/setnet-0.1/debian/prerm.ex b/debian_package/setnet-0.1/debian/prerm.ex new file mode 100644 index 0000000..725e2b8 --- /dev/null +++ b/debian_package/setnet-0.1/debian/prerm.ex @@ -0,0 +1,38 @@ +#!/bin/sh +# prerm script for setnet +# +# see: dh_installdeb(1) + +set -e + +# summary of how this script can be called: +# * `remove' +# * `upgrade' +# * `failed-upgrade' +# * `remove' `in-favour' +# * `deconfigure' `in-favour' +# `removing' +# +# for details, see https://www.debian.org/doc/debian-policy/ or +# the debian-policy package + + +case "$1" in + remove|upgrade|deconfigure) + ;; + + failed-upgrade) + ;; + + *) + echo "prerm called with unknown argument \`$1'" >&2 + exit 1 + ;; +esac + +# dh_installdeb will replace this with shell code automatically +# generated by other debhelper scripts. + +#DEBHELPER# + +exit 0 diff --git a/debian_package/setnet-0.1/debian/rules b/debian_package/setnet-0.1/debian/rules new file mode 100755 index 0000000..2f54c47 --- /dev/null +++ b/debian_package/setnet-0.1/debian/rules @@ -0,0 +1,25 @@ +#!/usr/bin/make -f +# See debhelper(7) (uncomment to enable) +# output every command that modifies files on the build system. +#export DH_VERBOSE = 1 + + +# see FEATURE AREAS in dpkg-buildflags(1) +#export DEB_BUILD_MAINT_OPTIONS = hardening=+all + +# see ENVIRONMENT in dpkg-buildflags(1) +# package maintainers to append CFLAGS +#export DEB_CFLAGS_MAINT_APPEND = -Wall -pedantic +# package maintainers to append LDFLAGS +#export DEB_LDFLAGS_MAINT_APPEND = -Wl,--as-needed + + +%: + dh $@ + + +# dh_make generated override targets +# This is example for Cmake (See https://bugs.debian.org/641051 ) +#override_dh_auto_configure: +# dh_auto_configure -- # -DCMAKE_LIBRARY_PATH=$(DEB_HOST_MULTIARCH) + diff --git a/debian_package/setnet-0.1/debian/setnet-docs.docs b/debian_package/setnet-0.1/debian/setnet-docs.docs new file mode 100644 index 0000000..efea0a6 --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet-docs.docs @@ -0,0 +1,2 @@ +README.Debian +README.source diff --git a/debian_package/setnet-0.1/debian/setnet.cron.d.ex b/debian_package/setnet-0.1/debian/setnet.cron.d.ex new file mode 100644 index 0000000..fd54f7d --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet.cron.d.ex @@ -0,0 +1,4 @@ +# +# Regular cron jobs for the setnet package +# +0 4 * * * root [ -x /usr/bin/setnet_maintenance ] && /usr/bin/setnet_maintenance diff --git a/debian_package/setnet-0.1/debian/setnet.debhelper.log b/debian_package/setnet-0.1/debian/setnet.debhelper.log new file mode 100644 index 0000000..73fb7fd --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet.debhelper.log @@ -0,0 +1,19 @@ +dh_update_autotools_config +dh_auto_configure +dh_auto_build +dh_auto_test +dh_prep +dh_auto_install +dh_install +dh_installdocs +dh_installchangelogs +dh_perl +dh_link +dh_strip_nondeterminism +dh_compress +dh_fixperms +dh_installdeb +dh_gencontrol +dh_md5sums +dh_builddeb +dh_builddeb diff --git a/debian_package/setnet-0.1/debian/setnet.default.ex b/debian_package/setnet-0.1/debian/setnet.default.ex new file mode 100644 index 0000000..ade741e --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet.default.ex @@ -0,0 +1,10 @@ +# Defaults for setnet initscript +# sourced by /etc/init.d/setnet +# installed at /etc/default/setnet by the maintainer scripts + +# +# This is a POSIX shell fragment +# + +# Additional options that are passed to the Daemon. +DAEMON_OPTS="" diff --git a/debian_package/setnet-0.1/debian/setnet.doc-base.EX b/debian_package/setnet-0.1/debian/setnet.doc-base.EX new file mode 100644 index 0000000..42bd26a --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet.doc-base.EX @@ -0,0 +1,20 @@ +Document: setnet +Title: Debian setnet Manual +Author: +Abstract: This manual describes what setnet is + and how it can be used to + manage online manuals on Debian systems. +Section: unknown + +Format: debiandoc-sgml +Files: /usr/share/doc/setnet/setnet.sgml.gz + +Format: postscript +Files: /usr/share/doc/setnet/setnet.ps.gz + +Format: text +Files: /usr/share/doc/setnet/setnet.text.gz + +Format: HTML +Index: /usr/share/doc/setnet/html/index.html +Files: /usr/share/doc/setnet/html/*.html diff --git a/debian_package/setnet-0.1/debian/setnet.substvars b/debian_package/setnet-0.1/debian/setnet.substvars new file mode 100644 index 0000000..978fc8b --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet.substvars @@ -0,0 +1,2 @@ +misc:Depends= +misc:Pre-Depends= diff --git a/debian_package/setnet-0.1/debian/setnet/DEBIAN/conffiles b/debian_package/setnet-0.1/debian/setnet/DEBIAN/conffiles new file mode 100644 index 0000000..3479547 --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet/DEBIAN/conffiles @@ -0,0 +1,2 @@ +/etc/setnetrc +/etc/wpa_supplicant/wpa_setnet.conf diff --git a/debian_package/setnet-0.1/debian/setnet/DEBIAN/control b/debian_package/setnet-0.1/debian/setnet/DEBIAN/control new file mode 100644 index 0000000..6dee539 --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet/DEBIAN/control @@ -0,0 +1,13 @@ +Package: setnet +Version: 0.1-1 +Architecture: all +Maintainer: Vincenzo (KatolaZ) Nicosia +Installed-Size: 64 +Depends: bash, dialog, iproute2, dhclient +Suggests: wpasupplicant +Section: unknown +Priority: optional +Homepage: http://kalos.mine.nu/setnet +Description: simple bash+dialog tool to configure networks + setnet is a relatively simple bash+dialog tool to configure ethernet + and wifi connections. diff --git a/debian_package/setnet-0.1/debian/setnet/DEBIAN/md5sums b/debian_package/setnet-0.1/debian/setnet/DEBIAN/md5sums new file mode 100644 index 0000000..d5492f6 --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet/DEBIAN/md5sums @@ -0,0 +1,4 @@ +8ca53becf53712ce6d851a60622b5df5 usr/sbin/setnet.sh +14d36df6a96346c9126ffe5cb4c2bbd6 usr/share/doc/setnet/README.Debian +d47fe95e38c07c7ab04d65e36ba03614 usr/share/doc/setnet/changelog.Debian.gz +e5218c2f383b136780a03ba5e3f610b2 usr/share/doc/setnet/copyright diff --git a/debian_package/setnet-0.1/debian/setnet/etc/setnetrc b/debian_package/setnet-0.1/debian/setnet/etc/setnetrc new file mode 100644 index 0000000..d460eed --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet/etc/setnetrc @@ -0,0 +1,19 @@ +## +## +## setnetrc -- configuration file for setnet +## +## + +## +## The default configuration file for wpa_supplicant +## +WPA_FILE=/etc/wpa_supplicant/wpa_setnet.conf + + +## +## Logfile +## +LOGFILE=/var/log/setnet.log + + + diff --git a/debian_package/setnet-0.1/debian/setnet/etc/wpa_supplicant/wpa_setnet.conf b/debian_package/setnet-0.1/debian/setnet/etc/wpa_supplicant/wpa_setnet.conf new file mode 100644 index 0000000..07d4b6d --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet/etc/wpa_supplicant/wpa_setnet.conf @@ -0,0 +1,3 @@ +ctrl_interface=/var/run/wpa_supplicant +update_config=1 + diff --git a/debian_package/setnet-0.1/debian/setnet/usr/sbin/setnet.sh b/debian_package/setnet-0.1/debian/setnet/usr/sbin/setnet.sh new file mode 100755 index 0000000..e5cba98 --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet/usr/sbin/setnet.sh @@ -0,0 +1,1120 @@ +#!/bin/bash + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or (at +# your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +# +# ---------------------------------------------------------------------- +# +# setnet.sh -- view and configure network interfaces +# +# ---------------------------------------------------------------------- +# +# (c) KatolaZ (katolaz@freaknet.org) -- 2016/12/26 +# +# + + +## +## Initialisation +## + +VERSION=0.1 + +DIALOGRC=~/.dialogrc + + +TOPSTR="setnet-0.1 [user: `id -run`]" + +DIALOG="dialog --backtitle \"${TOPSTR}\" " + + + +TMPFILE=`(tempfile) 2>/dev/null` || tempfile=/tmp/setnet_$$ +WPA_PIDFILE=`(tempfile) 2>/dev/null` || tempfile=/tmp/setnet_wpapid_$$ + +WINDOW_WIDTH=75 +WINDOW_HEIGHT=20 + +INFO_WIDTH=40 +INFO_HEIGHT=10 + +FORM_WIDTH=60 +FORM_HEIGHT=12 + +NET_FAMILIES="inet inet6" + +## +## Load setnetrc +## + +function load_setnetrc(){ + + WPA_FILE="" + LOGFILE="" + ## If we were given a parameter, is the rc file to load... + ## + if [ $# -ge 1 ]; then + . $1 + return + fi + + ## + ## Otherwise, let's look in the standard locations, namely: + ## + + ## + ## 1) /etc/setnetrc + ## + + if [ -f /etc/setnetrc ]; then + . /etc/setnetrc + fi + + ## + ## 2) ~/.setnetrc + ## + + if [ -f ~/.setnetrc ]; then + . ~/.setnetrc + fi + + + if [ -z ${WPA_FILE} ]; then + echo "Could not find WPA_FILE defined anywhere. Exiting" + exit 1 + fi + + if [ -z ${LOGFILE} ]; then + echo "Could not find LOGFILE defined anywhere. Exiting" + exit 1 + fi +} + + +function cleanup(){ + rm -f ${TMPFILE} + rm -f ${WPA_PIDFILE} +} + + +################### +# # +# LOGGING # +# # +################### + +## +## log() takes two arguments, namely the label and the message +## +## if the label is "_self", print the name of the function which +## called log() +## +function log(){ + + local LABEL=$1 + local MSG=$2 + + if [ ${LABEL} == "_self" ]; then + LABEL=${FUNCNAME[1]} + fi + echo -e "${LABEL}:" "${MSG}" >> "${LOGFILE}" + +} + +########################################## + +function edit_file(){ + + local FILEIN=$1 + log "edit_file" "editing file ${FILEIN}" + eval "${DIALOG} --title 'Editing file: ${FILEIN}' \ + --editbox ${FILEIN} ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 2> ${TMPFILE}" + + if [ $? -eq 0 ]; then + log "edit_file" "Copying ${TMPFILE} into ${FILEIN}" + if cp ${TMPFILE} ${FILEIN} + then + eval "${DIALOG} --clear --msgbox 'File ${FILEIN} saved successfully' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + else + eval "${DIALOG} --clear --msgbox 'Error saving file ${FILEIN}' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi + else + log "edit_file" "Editing of ${FILEIN} aborted..."xs + eval "${DIALOG} --clear --msgbox 'File ${FILEIN} not saved' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi +} + + + + +## +## Read all the configured addresses for a given inet family +## +function get_addr_family(){ + + local DEVNAME=$1 + local DEVFAMILY=$2 + + NUMADDR=`ip -f ${DEVFAMILY} addr show ${DEVNAME} | grep ${DEVFAMILY} | wc -l` + ADDR_STR="" + for i in `seq ${NUMADDR}`; do + ADDR=`ip -f ${DEVFAMILY} addr show ${DEVNAME} | grep ${DEVFAMILY} | \ + tail -n +$i | head -1 | sed -r -e "s:^\ +::g" | cut -d " " -f 2,4,6 |\ + sed -r -e "s:\ : -- :g"` + ADDR_STR="${ADDR_STR}\n${DEVFAMILY}: ${ADDR}\n" + done +} + +## +## Show the current configuration of a given device +## + +function show_device_conf(){ + + local DEVNAME=$1 + if [ ${DEVNAME} == "" ]; then + return -1 + fi + + DEVMAC=`ip link show ${DEVNAME} | tail -n +2 | sed -r 's/^\ +//g' | cut -d " " -f 2` + DEVCONF="MAC: ${DEVMAC}\n" + + log "_self" "NET_FAMILIES: \"${NET_FAMILIES}\"" + + for f in ${NET_FAMILIES}; do + get_addr_family ${DEVNAME} ${f} + log "_self" "family: ${f} ADDR_STR: \"${ADDR_STR}\"" + + if [ -z "${ADDR_STR}" ]; then + DEVCONF="${DEVCONF}${f}: Unconfigured\n" + else + DEVCONF="${DEVCONF}${ADDR_STR}" + fi + log "_self" "DEVCONF: ${DEVCONF}" + done + + DEVCONF="${DEVCONF}\n== name servers ==\n`cat /etc/resolv.conf | grep '^nameserver'`" + + eval "${DIALOG} --clear --title 'Current configuration of device: ${DEVNAME}' \ + --msgbox '\n\n${DEVCONF}' ${WINDOW_HEIGHT} ${WINDOW_WIDTH} " + return 0 + +} + + + +function config_ethernet_static(){ + + local DEV_IP="192.168.1.2" + local DEV_NET="192.168.1.0" + local DEV_NETMASK="255.255.255.0" + local DEV_GW="192.168.1.1" + local DEV_DNS1="208.67.222.222" + local DEV_DNS2="208.67.220.220" + + local DEVNAME=$1 + + exec 3>&1 + eval "${DIALOG} --clear --form 'Set network for device: ${DEVNAME}'" \ + ${FORM_HEIGHT} ${FORM_WIDTH} 0 \ + "IP" 1 1 "${DEV_IP}" 1 16 16 16 \ + "Network" 2 1 "${DEV_NET}" 2 16 16 16 \ + "Netmask" 3 1 "${DEV_NETMASK}" 3 16 16 16 \ + "Gateway" 4 1 "${DEV_GW}" 4 16 16 16 \ + "Primary DNS" 5 1 "${DEV_DNS1}" 5 16 16 16 \ + "Secondary DNS" 6 1 "${DEV_DNS2}" 6 16 16 16 2> ${TMPFILE} + + if [ $? -eq 1 ]; then + eval "${DIALOG} --infobox 'Configuration of ${DEVNAME} aborted' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + + read -d "*" DEV_IP DEV_NET DEV_NETMASK DEV_GW DEV_DNS1 DEV_DNS2 < ${TMPFILE} + eval "${DIALOG} --msgbox 'Proposed configuration of ${DEVNAME}:\n ${DEV_IP}\n${DEV_NET}\n${DEV_NETMASK}\n${DEV_GW}\n${DEV_DNS1}\n${DEV_DNS2}'\ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + + ## Configure IP + + ip link set ${DEVNAME} down + ip link set ${DEVNAME} up + ip address flush dev ${DEVNAME} + ip address add ${DEV_IP}/${DEV_NETMASK} dev ${DEVNAME} + + ## Configure GW + ip route flush dev ${DEVNAME} + ip route add ${DEV_NET}/${DEV_NETMASK} dev ${DEVNAME} + ip route add default via ${DEV_GW} + + ## Configure DNS + mv /etc/resolv.conf /etc/resolv.conf.bak + if [ -n ${DEV_DNS1} ]; then + echo "nameserver ${DEV_DNS1}" >> /etc/resolv.conf + fi + if [ -n ${DEV_DNS2} ]; then + echo "nameserver ${DEV_DNS2}" >> /etc/resolv.conf + fi + show_device_conf ${DEVNAME} +} + +function config_ethernet_dhcp(){ + + local DEVNAME=$1 + + eval "${DIALOG} --infobox 'Running \"dhclient ${DEVNAME}\"' ${INFO_HEIGHT} ${INFO_WIDTH}" + dhclient -r ${DEVNAME} + dhclient ${DEVNAME} + show_device_conf ${DEVNAME} +} + + +function config_ethernet(){ + + local DEVNAME=$1 + + while [ 1 -eq 1 ]; do + eval "${DIALOG} --clear --cancel-label 'Up' \ + --menu 'Configuring ${DEVNAME}' ${INFO_HEIGHT} ${INFO_WIDTH} 4 \ + 'DHCP' ''\ + 'Static' '' 2>${TMPFILE}" + if [ $? -eq 1 ]; then + return + fi + ACTION=`<${TMPFILE}` + case ${ACTION} in + "Static") + config_ethernet_static ${DEVNAME} + ;; + "DHCP") + config_ethernet_dhcp ${DEVNAME} + ;; + esac + done + +} + +function wifi_essid_from_mac(){ + + local DEVNAME=$1 + local W_MAC=$2 + + W_ESSID=`wpa_cli -i ${DEVNAME} scan_results | grep -E "^${W_MAC}" | \ + sed -r -e 's/\t/\|/g' | cut -d "|" -f 5` + + log "${FUNCNAME[0]}" "Recovered ESSID: ${W_ESSID}" +} + +function wifi_flags_from_mac(){ + local DEVNAME=$1 + local W_MAC=$2 + + W_FLAGS=`wpa_cli -i ${DEVNAME} scan_results | grep -E "^${W_MAC}" | \ + sed -r -e 's/\t/\|/g' | cut -d "|" -f 4` + log "wifi_essid_from_mac" "Recovered W_FLAGS: ${W_FLAGS}" + +} + + +function wifi_network_list(){ + + local DEVNAME=$1 + wpa_cli -i ${DEVNAME} list_networks | tail -n +2 | sed -r -e 's/\t/\|/g' > ${TMPFILE} + + NETLIST="" + LAST_IFS=$IFS + IFS="|" + while read NETNUM NETESSID NETBSSID NETFLAGS; do + IS_DIS=`echo ${NETFLAGS} | sed -r -e 's/\[//g;s/\]//g' | grep -i disabled | wc -l` + if [ ${IS_DIS} -eq 1 ]; then + STATUS="(DIS)" + else + STATUS="(ENAB)" + fi + IS_CUR=`echo ${NETFLAGS} | sed -r -e 's/\[//g;s/\]//g' | grep -i current | wc -l` + if [ ${IS_CUR} -eq 1 ]; then + STATUS="${STATUS}(CUR)" + fi + + + NETLIST="${NETLIST} ${NETNUM} \"${NETESSID}-${STATUS}\"" + done < ${TMPFILE} + IFS=${LAST_IFS} + + log "_self" "NETLIST: ${NETLIST}" +} + + +## +## Manage the authentication for a given wifi ESSID +## +function wifi_authenticate(){ + + local DEVNAME=$1 + local W_MAC=$2 + + + log "${FUNCNAME[0]}" "configuring ${DEVNAME} on ${W_MAC}" + ## This will set the variable W_ESSID appropriately + wifi_essid_from_mac ${DEVNAME} ${W_MAC} + + ## This will set the variable W_FLAGS appropriately + wifi_flags_from_mac ${DEVNAME} ${W_MAC} + + + log "${FUNCNAME[0]}" "configuring essid: ${W_ESSID} on device: ${DEVNAME}" + log "${FUNCNAME[0]}" "W_FLAGS: ${W_FLAGS}" + + + NET_EXISTS=`wpa_cli -i ${DEVNAME} list_networks | tail -n +2 | sed -r -e 's/\t/\|/g' \ + | cut -d "|" -f 2 | grep "${W_ESSID}$" | wc -l` + if [ ${NET_EXISTS} -ne 0 ]; then + NET_NUM=`wpa_cli -i ${DEVNAME} list_networks | tail -n +2 | sed -r -e 's/\t/\|/g' \ + | cut -d "|" -f 1,2 | grep "${W_ESSID}$" | cut -d "|" -f 1` + wpa_cli -i ${DEVNAME} remove_network ${NET_NUM} > ${TMPFILE} + STATUS=`<${TMPFILE}` + if [ ${STATUS} != "OK" ]; then + eval "${DIALOG} --msgbox 'Error while removing existing network:\n$essid: {W_ESSID}'" + ${INFO_HEIGHT} ${INFO_WIDTH} + return + fi + fi + + HAS_WPA=`echo "${W_FLAGS}" | grep -E "WPA.*-PSK" | wc -l` + + log "${FUNCNAME[0]}" "HAS_WPA: \"${HAS_WPA}\"" + + ### This section will configure WPA-PSK or WPA2-PSK + if [ ${HAS_WPA} != "0" ]; then + PSK="" + PSK_LENGTH=${#PSK} + while [ ${PSK_LENGTH} -le 7 ]; do + eval "${DIALOG} --insecure --inputbox 'Please insert WPA PSK\n(8 characters)' \ + ${INFO_HEIGHT} ${INFO_WIDTH} 2> ${TMPFILE}" + if [ $? -eq 1 ]; then + eval "${DIALOG} --clear --msgbox 'Network configuration aborted!!!' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return 1 + fi + PSK=`<${TMPFILE}` + PSK_LENGTH=${#PSK} + done + + + NET_NUM=`wpa_cli -i ${DEVNAME} add_network | tail -1` + + log "${FUNCNAME[0]}" `wpa_cli -i ${DEVNAME} set_network ${NET_NUM} ssid "\"${W_ESSID}\""` + log "${FUNCNAME[0]}" `wpa_cli -i ${DEVNAME} set_network ${NET_NUM} psk \"${PSK}\"` + ## remove the password from tmpfile + echo "" > ${TMPFILE} + eval "${DIALOG} --clear --defaultno --yesno \ + 'Network \"${W_ESSID}\" added\nSave configuration file?' \ + ${INFO_HEIGHT} ${INFO_WIDTH} 2> ${TMPFILE}" + if [ $? -eq 0 ]; then + ## Save the config file + wifi_save_file ${DEVNAME} + fi + + eval "${DIALOG} --msgbox 'Network added successfully' ${INFO_HEIGHT} ${INFO_WIDTH}" + return 0 + fi + + HAS_ESS=`echo "${W_FLAGS}" | grep -E "ESS" | wc -l` + + log "_self" "HAS_ESS: \"${HAS_ESS}\"" + + if [ ${HAS_ESS} != "0" ]; then + NET_NUM=`wpa_cli -i ${DEVNAME} add_network | tail -1` + + log "_self" "NET_NUM: ${NET_NUM}" + log "_self" `wpa_cli -i ${DEVNAME} set_network ${NET_NUM} ssid "\"${W_ESSID}\""` + log "_self" `wpa_cli -i ${DEVNAME} set_network ${NET_NUM} key_mgmt NONE` + eval "${DIALOG} --clear --defaultno --yesno \ + 'Network \"${W_ESSID}\" added\nSave configuration file?' \ + ${INFO_HEIGHT} ${INFO_WIDTH} 2> ${TMPFILE}" + if [ $? -eq 0 ]; then + ## Save the config file + wifi_save_file ${DEVNAME} + fi + + return 0 + else + eval " ${DIALOG} --msgbox 'Error occurred!!!!' ${INFO_HEIGHT} ${INFO_WIDTH}" + return 0 + fi + + ## No available authentication methods.... + + eval "${DIALOG} --msgbox 'No supported authentication method for ${W_ESSID}'" + return 1 +} + + + + +## +## Configure a new connection from a list of available wi-fi networks +## + +function wifi_add(){ + + local DEVNAME=$1 + + wpa_cli -i ${DEVNAME} scan + eval "${DIALOG} --timeout 4 --msgbox 'Scanning for networks...' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + wpa_cli -i ${DEVNAME} scan_results | grep -E "^[0-9a-f][0-9a-f]:" | \ + sed -r -e 's/\t/|/g' |\ + sort -t "|" -r -n -k 3 > ${TMPFILE} + + wifinets=() + LAST_IFS=$IFS + IFS="|" + while read W_MAC W_FREQ W_STRNGT W_FLAGS W_ESSID; do + + log "_self" "W_ESSID: \"${W_ESSID}\"" + wifinets+=(${W_MAC} "${W_ESSID} -- ${W_FLAGS}") + done < ${TMPFILE} + IFS=${LAST_IFS} + + + log "$_self" "Wifi nets: \n${wifinets}\n===" + dialog --menu 'Select a network' ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 10 \ + "${wifinets[@]}" 2> ${TMPFILE} + if [ $? -eq 1 ]; then + return + fi + + W_MAC=$(cat ${TMPFILE}) + + + wifi_authenticate ${DEVNAME} ${W_MAC} + if [ $? -ne 0 ]; then + eval "${DIALOG} --msgbox 'Error while configuring ${DEVNAME}' " + fi + return $? +} + + +function wifi_save_file(){ + + local DEVNAME=$1 + + wpa_cli -i ${DEVNAME} save_config | tail -1 > ${TMPFILE} + SAVE_STATUS=`<${TMPFILE}` + if [ ${SAVE_STATUS} == "OK" ]; then + eval "${DIALOG} --msgbox 'Current configuration dumped to file ${WPA_FILE}' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + else + eval "${DIALOG} --msgbox 'Error while saving configuration to file ${WPA_FILE}' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi +} + +function wifi_remove(){ + + local DEVNAME=$1 + + wifi_network_list ${DEVNAME} + + eval "${DIALOG} --menu 'Select network to remove' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 10 ${NETLIST} \ + 2> ${TMPFILE}" + + if [ $? -eq 0 ]; then + ## a network has been selected + NETNUM=`<${TMPFILE}` + WPA_STATUS=`wpa_cli -i ${DEVNAME} remove_network ${NETNUM} | tail -1 ` + if [ ${WPA_STATUS} == "OK" ]; then + eval "${DIALOG} --clear --defaultno --yesno \ + 'Network ${NETNUM} removed\nSave configuration file?' \ + ${INFO_HEIGHT} ${INFO_WIDTH} 2> ${TMPFILE}" + if [ $? -eq 0 ]; then + ## Save the config file + wifi_save_file ${DEVNAME} + fi + + return + else + eval "${DIALOG} --clear --msgbox 'Network ${NETNUM} NOT removed' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + else + eval "${DIALOG} --clear --msgbox 'No network removed!!!' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + +} + + +function wifi_restart_wpa(){ + + local DEVNAME=$1 + local WPA_FILE=$2 + + WPA_PID=`ps ax | grep wpa_supplicant | grep " -i ${DEVNAME}" | +sed -r -e 's/^\ +//g' | cut -d " " -f 1` + + log "${FUNCNAME[0]}" "WPA_PID: ${WPA_PID}" + kill -n 9 ${WPA_PID} + + if [ $? -ne 0 ]; then + eval "${DIALOG} --clear --msgbox 'Error killing wpa_supplicant' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi + + wpa_supplicant -B -i ${DEVNAME} -c ${WPA_FILE} -P${WPA_PIDFILE} + WPA_PID=`ps ax | grep wpa_supplicant | grep " -i ${DEVNAME}" | cut -d " " -f 1 ` + WPA_PID_SAVED=`<${WPA_PIDFILE}` + if [ [ -n ${WPA_PID} ] || [ ${WPA_PID} != ${WPA_PID_SAVED} ] ]; then + eval "${DIALOG} --clear --msgbox 'Error restarting wpa_supplicant' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + else + eval "${DIALOG} --clear --msgbox 'wpa_supplicant restarted successfully' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi + +} + + + +## +## wifi_enable: show the list of configured networks, and enable the +## one the used has clicked on +## + +function wifi_enable(){ + + local DEVNAME=$1 + + wifi_network_list ${DEVNAME} + + eval "${DIALOG} --menu 'Select configured network' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 10 ${NETLIST} \ + 2> ${TMPFILE}" + + if [ $? -eq 0 ]; then + ## a network has been selected + NETNUM=`<${TMPFILE}` + WPA_STATUS=`wpa_cli -i ${DEVNAME} enable ${NETNUM} | tail -1 ` + if [ ${WPA_STATUS} == "OK" ]; then + eval "${DIALOG} --clear --msgbox 'Network ${NETNUM} enabled' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + config_ethernet ${DEVNAME} + return + else + eval "${DIALOG} --clear --msgbox 'Network ${NETNUM} NOT enabled' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + else + eval "${DIALOG} --clear --msgbox 'No network enabled!!!' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi +} + + +function wifi_disable(){ + + local DEVNAME=$1 + wifi_network_list ${DEVNAME} + eval "${DIALOG} --menu 'Select configured network' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 10 ${NETLIST} \ + 2> ${TMPFILE}" + + if [ $? -eq 0 ]; then + ## a network has been selected + NETNUM=`<${TMPFILE}` + WPA_STATUS=`wpa_cli -i ${DEVNAME} disable ${NETNUM} | tail -1 ` + if [ ${WPA_STATUS} == "OK" ]; then + eval "${DIALOG} --clear --msgbox 'Network ${NETNUM} disabled' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + else + eval "${DIALOG} --clear --msgbox 'Network ${NETNUM} NOT disabled' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + else + eval "${DIALOG} --clear --msgbox 'No network disabled!!!' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi +} + + + +function wifi_load_file(){ + + local DEVNAME=$1 + + eval "${DIALOG} --fselect ${WPA_FILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH} \ + 2>${TMPFILE}|" + + if [ $? -eq 0 ]; then + SEL_FILE=`<${TMPFILE}` + while [ -d ${SEL_FILE} ]; do + eval "${DIALOG} --fselect ${SEL_FILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH} \ + 2>${TMPFILE}" + if [ $? -eq 0 ]; then + SEL_FILE=`<${TMPFILE}` + else + eval "${DIALOG} --clear --infobox 'WPA_FILE was not modified' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + done + + if [ -f ${SEL_FILE} ]; then + WPA_FILE=${SEL_FILE} + eval "${DIALOG} --clear --defaultno --yesno \ + 'WPA_FILE changed to ${WPA_FILE}\nRestart wpa_supplicant?' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + if [ $? -eq 0 ]; then + wifi_restart_wpa ${DEVNAME} ${WPA_FILE} + fi + else + eval "${DIALOG} --clear --infobox 'Invalid file name!\n WPA_FILE *not* changed' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + return + fi + else + eval "${DIALOG} --clear --infobox 'WPA_FILE was not modified' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi + +} + + + +function config_wifi(){ + + local DEVNAME=$1 + + while [ 1 -eq 1 ]; do + eval "${DIALOG} --clear --cancel-label 'Up' \ + --menu 'Configuring ${DEVNAME}\n(Current file: ${WPA_FILE})' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 12 \ + 'Restart' 'Restart wpa_supplicant' \ + 'Enable' 'Enable a configured network' \ + 'Disable' 'Disable a configured network' \ + 'Add' 'Configure a new network' \ + 'Remove' 'Delete an existing network' \ + 'Show' 'Show current configuration file' \ + 'Edit' 'Edit current configuration file' \ + 'Save' 'Save configuration to file'\ + 'Load' 'Load configuration from file'\ + 'New' 'Create new configuration file'\ + 2>${TMPFILE}" + if [ $? -eq 1 ]; then + return + fi + ACTION=`<${TMPFILE}` + case ${ACTION} in + "Restart") + ## Restart wpa_supplicant + wifi_restart_wpa ${DEVNAME} ${WPA_FILE} + ;; + "Enable") + wifi_enable ${DEVNAME} + ;; + "Disable") + wifi_disable ${DEVNAME} + ;; + "Add") + wifi_add ${DEVNAME} + ;; + "Remove") + wifi_remove ${DEVNAME} + ;; + "Show") + eval "${DIALOG} --title 'Current file: ${WPA_FILE}' \ + --textbox ${WPA_FILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + ;; + "Edit") + edit_file ${WPA_FILE} + ;; + "Save") + wifi_save_file ${DEVNAME} + ;; + "Load") + wifi_load_file ${DEVNAME} + ;; + "New") + eval "${DIALOG} --msgbox 'Sorry!Not yet implemented!' \ + ${INFO_HEIGHT} ${INFO_WIDTH} 2>${TMPFILE}" + ;; + esac + done + +} + + + +## +## (Re)-Configure a network device +## + +function configure_device(){ + + local DEVNAME=$1 + + case ${DEVNAME} in + eth*) + config_ethernet ${DEVNAME} + ;; + wlan*) + config_wifi ${DEVNAME} + ;; + *) + eval "${DIALOG} --clear --title 'ERROR' --msgbox \ + '${DEVNAME}: Unsupported device type' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + ;; + esac + + +} + + +function set_device_up(){ + + local DEVNAME=$1 + + ip link set ${DEVNAME} up + +} + +function set_device_down(){ + + local DEVNAME=$1 + + ip link set ${DEVNAME} down + +} + +function show_device_menu(){ + + local DEVNAME=$1 + while [ 1 -eq 1 ]; do + eval "${DIALOG} --clear --cancel-label 'Up' --menu 'Device: ${DEVNAME}' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 8 \ + 'View' 'View current configuration' \ + 'Conf' 'Configure device' \ + 'Start' 'Bring interface up' \ + 'Stop' 'Put interface down' \ + 'Restart' 'Restart interface' 2> ${TMPFILE}" + + if [ $? -eq 1 ]; then + return + fi + + DEV_ACTION=`<${TMPFILE}` + case ${DEV_ACTION} in + "View") + show_device_conf ${DEVNAME} + ;; + "Conf") + configure_device ${DEVNAME} + ;; + "Start") + set_device_up ${DEVNAME} + ;; + "Stop") + set_device_down ${DEVNAME} + ;; + "Restart") + set_device_down ${DEVNAME} + set_device_up ${DEVNAME} + ;; + *) + ;; + + esac + done +} + +## +## Show all the available network devices +## + +function show_devs() { + + DEVFILE=/proc/net/dev + DEVICES=`ip link show | awk 'NR % 2 == 1' | cut -d ":" -f 2` + + DEVICE_TAGS="" + + for i in `echo $DEVICES`; do + if [ $i != "lo" ]; then + DEVICE_TAGS="${DEVICE_TAGS} $i $i" + fi + done + + eval "${DIALOG} --clear --cancel-label 'Up' \ + --menu 'Select Interface to configure' ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 4 \ + ${DEVICE_TAGS} 2> ${TMPFILE}" + return $? +} + + +function dev_config_menu(){ + + while [ 1 -eq 1 ]; do + show_devs + if [ $? -eq 1 ]; then + return + fi + DEVNAME=`<${TMPFILE}` + show_device_menu ${DEVNAME} + done +} + +function show_info(){ + + cat < ${TMPFILE} + +== setnet.sh 0.1 == + +setnet.sh is a simple state-less tool to manage and configure network +interfaces. It is a shell wrapper around the functionalities of "ip", +"dhclient", "wpa_cli", and can be used to configure network +connections via Ethernet/Wi-Fi interfaces. + +Both Static and DHCP-based IP configuration is supported. + +At the moment, only WPA-PSK and open (no key) Wi-Fi connections are +available. + +EOF + eval "${DIALOG} --clear --cr-wrap --textbox ${TMPFILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + return +} + +function show_copyright(){ + + cat < ${TMPFILE} + +== setnet.sh 0.1 == + +(c) KatolaZ (katolaz@freaknet.org) -- 2016 + +EOF + eval "${DIALOG} --clear --cr-wrap --textbox ${TMPFILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + return +} + + +function show_license(){ + + cat < ${TMPFILE} + +== setnet.sh 0.1 == + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or (at +your option) any later version. + +This program is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + +---------------------------------------------------------------------- + + (c) KatolaZ -- 2016 + +---------------------------------------------------------------------- + +EOF + eval "${DIALOG} --clear --cr-wrap --textbox ${TMPFILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + return +} + + + +function about_menu(){ + + while [ 1 -eq 1 ]; do + eval "${DIALOG} --cancel-label 'Up' --menu 'setnet ${VERSION} -- About' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 6 \ + 'Info' 'General information' \ + 'Copyright' 'Copyright information' \ + 'License' 'How to distribute this program' \ + 2> ${TMPFILE}" + if [ $? -eq 1 ];then + return; + fi + + ACTION=`<${TMPFILE}` + case ${ACTION} in + "Info") + show_info + ;; + "Copyright") + show_copyright + ;; + "License") + show_license + ;; + esac + done +} + + +function show_toplevel(){ + + eval "${DIALOG} --clear --cancel-label 'Quit' --menu 'Main Menu' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 6 \ + 'Setup' 'Setup interfaces' \ + 'About' 'Info & Copyright' 2> ${TMPFILE}" + return $? +} + +function show_help(){ + + local SCRIPTNAME=$1 + echo "Usage: ${SCRIPTNAME} [OPTION]" + echo "Options:" + echo -e "\t -c cfg_file\tLoad configuration from cfg_file." + echo -e "\t -v\t\tPrint version number and exit. " + echo -e "\t -h\t\tShow this help." + +} + +function show_version(){ + + local SCRIPTNAME=$1 + echo "${SCRIPTNAME} -- version ${VERSION}" + echo "Copyright (C) Vincenzo \"KatolaZ\" Nicosia (katolaz@freaknet.org) -- 2016" + echo "This is free software. You can use and redistribute it under the " + echo "terms of the GNU General Public Licence version 3 or (at your option)" + echo "any later version." + echo + echo "YOU USE THIS SOFTWARE AT YOUR OWN RISK." + echo "There is ABSOLUTELY NO WARRANTY; not even for MERCHANTABILITY or" + echo "FITNESS FOR A PARTICULAR PURPOSE." +} + +function show_disclaimer(){ + + cat < ${TMPFILE} + + == setnet.sh 0.1 == + + (c) KatolaZ (katolaz@freaknet.org) -- 2016 + + -+- This is the alpha release of setnet.sh -+- + + THIS IS FREE SOFTWARE + YOU CAN USE AND DISTRIBUTE IT UNDER THE + TERMS OF THE GNU GENERAL PUBLIC LICENSE + + USE THIS SOFTWARE AT YOUR OWN RISK + + There is ABSOLUTELY NO WARRANTY; not even for + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE + + See "About" for more information about + copyright and license +EOF + + eval "${DIALOG} --clear --cr-wrap --textbox ${TMPFILE} 23 60" + return +} + + +function main(){ + + truncate -s 0 ${LOGFILE} + trap cleanup 0 $SIG_NONE $SIG_HUP $SIG_INT $SIG_TRAP $SIG_TERM + + show_disclaimer + + log "setnet" "Starting afresh on `date`" + SETNETRC=`realpath ${SETNETRC}` + log "main" "Using config file \"${SETNETRC}\"" + WPA_FILE=`realpath ${WPA_FILE}` + log "main" "Using WPA config file \"${WPA_FILE}\"" + LOFGILE=`realpath ${LOGFILE}` + log "main" "Using log file \"${LOGFILE}\"" + + while [ 1 -eq 1 ]; do + show_toplevel + if [ $? -eq 1 ]; then + cleanup + exit 1 + fi + ACTION=`<${TMPFILE}` + case ${ACTION} in + "Setup") + dev_config_menu + ;; + "About") + about_menu + ;; + esac + done + +} + + +## +## Get the options +## + +SETNETRC="" + +while getopts ":c:hv" opt; do + + case $opt in + c) + echo "Got option -c ${OPTARG}" + SETNETRC=`realpath ${OPTARG}` + echo "SETNETRC: ${SETNETRC}" + ;; + h) + show_help `basename $0` + exit 1 + ;; + v) + show_version `basename $0` + exit 1 + ;; + \?) + echo "Invalid option: -${OPTARG}" + exit 1 + ;; + :) + echo "Option -${OPTARG} requires an argument" + exit 1 + ;; + esac +done + + + +load_setnetrc ${SETNETRC} + +main + + diff --git a/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/README.Debian b/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/README.Debian new file mode 100644 index 0000000..7c41578 --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/README.Debian @@ -0,0 +1,21 @@ +setnet for Debian +---------------- + +setnet is a simple bash+dialog tool to congfigure ethernet and wifi networks. +It is still at alpha stage, so you should use it AT YOUR OWN RISK. + + +=== USAGE === + +setnet is installed under /usr/sbin/setnet.sh and by default it uses the file +/etc/setnetrc for configuration. There are currently only two defined variables +in setnetrc, namely + + - WPA_FILE + This is the file configuration file used by wpa_supplicant + - LOGNAME + This is the file where logs will be put + + + + -- Vincenzo (KatolaZ) Nicosia Fri, 30 Dec 2016 16:06:26 +0000 diff --git a/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/changelog.Debian.gz b/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/changelog.Debian.gz new file mode 100644 index 0000000..a71856b Binary files /dev/null and b/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/changelog.Debian.gz differ diff --git a/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/copyright b/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/copyright new file mode 100644 index 0000000..f425891 --- /dev/null +++ b/debian_package/setnet-0.1/debian/setnet/usr/share/doc/setnet/copyright @@ -0,0 +1,21 @@ +Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0/ +Upstream-Name: setnet +Source: + +Files: debian/* +Copyright: 2016 Vincenzo (KatolaZ) Nicosia +License: GPL-3+ + This package is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + . + This package is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + . + You should have received a copy of the GNU General Public License + along with this program. If not, see + . + diff --git a/debian_package/setnet-0.1/debian/source/format b/debian_package/setnet-0.1/debian/source/format new file mode 100644 index 0000000..163aaf8 --- /dev/null +++ b/debian_package/setnet-0.1/debian/source/format @@ -0,0 +1 @@ +3.0 (quilt) diff --git a/debian_package/setnet-0.1/debian/watch.ex b/debian_package/setnet-0.1/debian/watch.ex new file mode 100644 index 0000000..0f01132 --- /dev/null +++ b/debian_package/setnet-0.1/debian/watch.ex @@ -0,0 +1,39 @@ +# Example watch control file for uscan +# Rename this file to "watch" and then you can run the "uscan" command +# to check for upstream updates and more. +# See uscan(1) for format + +# Compulsory line, this is a version 4 file +version=4 + +# PGP signature mangle, so foo.tar.gz has foo.tar.gz.sig +#opts="pgpsigurlmangle=s%$%.sig%" + +# HTTP site (basic) +#http://example.com/downloads.html \ +# files/setnet-([\d\.]+)\.tar\.gz debian uupdate + +# Uncommment to examine a FTP server +#ftp://ftp.example.com/pub/setnet-(.*)\.tar\.gz debian uupdate + +# SourceForge hosted projects +# http://sf.net/setnet/ setnet-(.*)\.tar\.gz debian uupdate + +# GitHub hosted projects +#opts="filenamemangle=s%(?:.*?)?v?(\d[\d.]*)\.tar\.gz%-$1.tar.gz%" \ +# https://github.com//setnet/tags \ +# (?:.*?/)?v?(\d[\d.]*)\.tar\.gz debian uupdate + +# PyPI +# https://pypi.python.org/packages/source//setnet/ \ +# setnet-(.+)\.tar\.gz debian uupdate + +# Direct Git +# opts="mode=git" http://git.example.com/setnet.git \ +# refs/tags/v([\d\.]+) debian uupdate + + + + +# Uncomment to find new files on GooglePages +# http://example.googlepages.com/foo.html setnet-(.*)\.tar\.gz diff --git a/debian_package/setnet-0.1/setnet.sh b/debian_package/setnet-0.1/setnet.sh new file mode 100755 index 0000000..e5cba98 --- /dev/null +++ b/debian_package/setnet-0.1/setnet.sh @@ -0,0 +1,1120 @@ +#!/bin/bash + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or (at +# your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +# +# ---------------------------------------------------------------------- +# +# setnet.sh -- view and configure network interfaces +# +# ---------------------------------------------------------------------- +# +# (c) KatolaZ (katolaz@freaknet.org) -- 2016/12/26 +# +# + + +## +## Initialisation +## + +VERSION=0.1 + +DIALOGRC=~/.dialogrc + + +TOPSTR="setnet-0.1 [user: `id -run`]" + +DIALOG="dialog --backtitle \"${TOPSTR}\" " + + + +TMPFILE=`(tempfile) 2>/dev/null` || tempfile=/tmp/setnet_$$ +WPA_PIDFILE=`(tempfile) 2>/dev/null` || tempfile=/tmp/setnet_wpapid_$$ + +WINDOW_WIDTH=75 +WINDOW_HEIGHT=20 + +INFO_WIDTH=40 +INFO_HEIGHT=10 + +FORM_WIDTH=60 +FORM_HEIGHT=12 + +NET_FAMILIES="inet inet6" + +## +## Load setnetrc +## + +function load_setnetrc(){ + + WPA_FILE="" + LOGFILE="" + ## If we were given a parameter, is the rc file to load... + ## + if [ $# -ge 1 ]; then + . $1 + return + fi + + ## + ## Otherwise, let's look in the standard locations, namely: + ## + + ## + ## 1) /etc/setnetrc + ## + + if [ -f /etc/setnetrc ]; then + . /etc/setnetrc + fi + + ## + ## 2) ~/.setnetrc + ## + + if [ -f ~/.setnetrc ]; then + . ~/.setnetrc + fi + + + if [ -z ${WPA_FILE} ]; then + echo "Could not find WPA_FILE defined anywhere. Exiting" + exit 1 + fi + + if [ -z ${LOGFILE} ]; then + echo "Could not find LOGFILE defined anywhere. Exiting" + exit 1 + fi +} + + +function cleanup(){ + rm -f ${TMPFILE} + rm -f ${WPA_PIDFILE} +} + + +################### +# # +# LOGGING # +# # +################### + +## +## log() takes two arguments, namely the label and the message +## +## if the label is "_self", print the name of the function which +## called log() +## +function log(){ + + local LABEL=$1 + local MSG=$2 + + if [ ${LABEL} == "_self" ]; then + LABEL=${FUNCNAME[1]} + fi + echo -e "${LABEL}:" "${MSG}" >> "${LOGFILE}" + +} + +########################################## + +function edit_file(){ + + local FILEIN=$1 + log "edit_file" "editing file ${FILEIN}" + eval "${DIALOG} --title 'Editing file: ${FILEIN}' \ + --editbox ${FILEIN} ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 2> ${TMPFILE}" + + if [ $? -eq 0 ]; then + log "edit_file" "Copying ${TMPFILE} into ${FILEIN}" + if cp ${TMPFILE} ${FILEIN} + then + eval "${DIALOG} --clear --msgbox 'File ${FILEIN} saved successfully' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + else + eval "${DIALOG} --clear --msgbox 'Error saving file ${FILEIN}' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi + else + log "edit_file" "Editing of ${FILEIN} aborted..."xs + eval "${DIALOG} --clear --msgbox 'File ${FILEIN} not saved' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi +} + + + + +## +## Read all the configured addresses for a given inet family +## +function get_addr_family(){ + + local DEVNAME=$1 + local DEVFAMILY=$2 + + NUMADDR=`ip -f ${DEVFAMILY} addr show ${DEVNAME} | grep ${DEVFAMILY} | wc -l` + ADDR_STR="" + for i in `seq ${NUMADDR}`; do + ADDR=`ip -f ${DEVFAMILY} addr show ${DEVNAME} | grep ${DEVFAMILY} | \ + tail -n +$i | head -1 | sed -r -e "s:^\ +::g" | cut -d " " -f 2,4,6 |\ + sed -r -e "s:\ : -- :g"` + ADDR_STR="${ADDR_STR}\n${DEVFAMILY}: ${ADDR}\n" + done +} + +## +## Show the current configuration of a given device +## + +function show_device_conf(){ + + local DEVNAME=$1 + if [ ${DEVNAME} == "" ]; then + return -1 + fi + + DEVMAC=`ip link show ${DEVNAME} | tail -n +2 | sed -r 's/^\ +//g' | cut -d " " -f 2` + DEVCONF="MAC: ${DEVMAC}\n" + + log "_self" "NET_FAMILIES: \"${NET_FAMILIES}\"" + + for f in ${NET_FAMILIES}; do + get_addr_family ${DEVNAME} ${f} + log "_self" "family: ${f} ADDR_STR: \"${ADDR_STR}\"" + + if [ -z "${ADDR_STR}" ]; then + DEVCONF="${DEVCONF}${f}: Unconfigured\n" + else + DEVCONF="${DEVCONF}${ADDR_STR}" + fi + log "_self" "DEVCONF: ${DEVCONF}" + done + + DEVCONF="${DEVCONF}\n== name servers ==\n`cat /etc/resolv.conf | grep '^nameserver'`" + + eval "${DIALOG} --clear --title 'Current configuration of device: ${DEVNAME}' \ + --msgbox '\n\n${DEVCONF}' ${WINDOW_HEIGHT} ${WINDOW_WIDTH} " + return 0 + +} + + + +function config_ethernet_static(){ + + local DEV_IP="192.168.1.2" + local DEV_NET="192.168.1.0" + local DEV_NETMASK="255.255.255.0" + local DEV_GW="192.168.1.1" + local DEV_DNS1="208.67.222.222" + local DEV_DNS2="208.67.220.220" + + local DEVNAME=$1 + + exec 3>&1 + eval "${DIALOG} --clear --form 'Set network for device: ${DEVNAME}'" \ + ${FORM_HEIGHT} ${FORM_WIDTH} 0 \ + "IP" 1 1 "${DEV_IP}" 1 16 16 16 \ + "Network" 2 1 "${DEV_NET}" 2 16 16 16 \ + "Netmask" 3 1 "${DEV_NETMASK}" 3 16 16 16 \ + "Gateway" 4 1 "${DEV_GW}" 4 16 16 16 \ + "Primary DNS" 5 1 "${DEV_DNS1}" 5 16 16 16 \ + "Secondary DNS" 6 1 "${DEV_DNS2}" 6 16 16 16 2> ${TMPFILE} + + if [ $? -eq 1 ]; then + eval "${DIALOG} --infobox 'Configuration of ${DEVNAME} aborted' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + + read -d "*" DEV_IP DEV_NET DEV_NETMASK DEV_GW DEV_DNS1 DEV_DNS2 < ${TMPFILE} + eval "${DIALOG} --msgbox 'Proposed configuration of ${DEVNAME}:\n ${DEV_IP}\n${DEV_NET}\n${DEV_NETMASK}\n${DEV_GW}\n${DEV_DNS1}\n${DEV_DNS2}'\ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + + ## Configure IP + + ip link set ${DEVNAME} down + ip link set ${DEVNAME} up + ip address flush dev ${DEVNAME} + ip address add ${DEV_IP}/${DEV_NETMASK} dev ${DEVNAME} + + ## Configure GW + ip route flush dev ${DEVNAME} + ip route add ${DEV_NET}/${DEV_NETMASK} dev ${DEVNAME} + ip route add default via ${DEV_GW} + + ## Configure DNS + mv /etc/resolv.conf /etc/resolv.conf.bak + if [ -n ${DEV_DNS1} ]; then + echo "nameserver ${DEV_DNS1}" >> /etc/resolv.conf + fi + if [ -n ${DEV_DNS2} ]; then + echo "nameserver ${DEV_DNS2}" >> /etc/resolv.conf + fi + show_device_conf ${DEVNAME} +} + +function config_ethernet_dhcp(){ + + local DEVNAME=$1 + + eval "${DIALOG} --infobox 'Running \"dhclient ${DEVNAME}\"' ${INFO_HEIGHT} ${INFO_WIDTH}" + dhclient -r ${DEVNAME} + dhclient ${DEVNAME} + show_device_conf ${DEVNAME} +} + + +function config_ethernet(){ + + local DEVNAME=$1 + + while [ 1 -eq 1 ]; do + eval "${DIALOG} --clear --cancel-label 'Up' \ + --menu 'Configuring ${DEVNAME}' ${INFO_HEIGHT} ${INFO_WIDTH} 4 \ + 'DHCP' ''\ + 'Static' '' 2>${TMPFILE}" + if [ $? -eq 1 ]; then + return + fi + ACTION=`<${TMPFILE}` + case ${ACTION} in + "Static") + config_ethernet_static ${DEVNAME} + ;; + "DHCP") + config_ethernet_dhcp ${DEVNAME} + ;; + esac + done + +} + +function wifi_essid_from_mac(){ + + local DEVNAME=$1 + local W_MAC=$2 + + W_ESSID=`wpa_cli -i ${DEVNAME} scan_results | grep -E "^${W_MAC}" | \ + sed -r -e 's/\t/\|/g' | cut -d "|" -f 5` + + log "${FUNCNAME[0]}" "Recovered ESSID: ${W_ESSID}" +} + +function wifi_flags_from_mac(){ + local DEVNAME=$1 + local W_MAC=$2 + + W_FLAGS=`wpa_cli -i ${DEVNAME} scan_results | grep -E "^${W_MAC}" | \ + sed -r -e 's/\t/\|/g' | cut -d "|" -f 4` + log "wifi_essid_from_mac" "Recovered W_FLAGS: ${W_FLAGS}" + +} + + +function wifi_network_list(){ + + local DEVNAME=$1 + wpa_cli -i ${DEVNAME} list_networks | tail -n +2 | sed -r -e 's/\t/\|/g' > ${TMPFILE} + + NETLIST="" + LAST_IFS=$IFS + IFS="|" + while read NETNUM NETESSID NETBSSID NETFLAGS; do + IS_DIS=`echo ${NETFLAGS} | sed -r -e 's/\[//g;s/\]//g' | grep -i disabled | wc -l` + if [ ${IS_DIS} -eq 1 ]; then + STATUS="(DIS)" + else + STATUS="(ENAB)" + fi + IS_CUR=`echo ${NETFLAGS} | sed -r -e 's/\[//g;s/\]//g' | grep -i current | wc -l` + if [ ${IS_CUR} -eq 1 ]; then + STATUS="${STATUS}(CUR)" + fi + + + NETLIST="${NETLIST} ${NETNUM} \"${NETESSID}-${STATUS}\"" + done < ${TMPFILE} + IFS=${LAST_IFS} + + log "_self" "NETLIST: ${NETLIST}" +} + + +## +## Manage the authentication for a given wifi ESSID +## +function wifi_authenticate(){ + + local DEVNAME=$1 + local W_MAC=$2 + + + log "${FUNCNAME[0]}" "configuring ${DEVNAME} on ${W_MAC}" + ## This will set the variable W_ESSID appropriately + wifi_essid_from_mac ${DEVNAME} ${W_MAC} + + ## This will set the variable W_FLAGS appropriately + wifi_flags_from_mac ${DEVNAME} ${W_MAC} + + + log "${FUNCNAME[0]}" "configuring essid: ${W_ESSID} on device: ${DEVNAME}" + log "${FUNCNAME[0]}" "W_FLAGS: ${W_FLAGS}" + + + NET_EXISTS=`wpa_cli -i ${DEVNAME} list_networks | tail -n +2 | sed -r -e 's/\t/\|/g' \ + | cut -d "|" -f 2 | grep "${W_ESSID}$" | wc -l` + if [ ${NET_EXISTS} -ne 0 ]; then + NET_NUM=`wpa_cli -i ${DEVNAME} list_networks | tail -n +2 | sed -r -e 's/\t/\|/g' \ + | cut -d "|" -f 1,2 | grep "${W_ESSID}$" | cut -d "|" -f 1` + wpa_cli -i ${DEVNAME} remove_network ${NET_NUM} > ${TMPFILE} + STATUS=`<${TMPFILE}` + if [ ${STATUS} != "OK" ]; then + eval "${DIALOG} --msgbox 'Error while removing existing network:\n$essid: {W_ESSID}'" + ${INFO_HEIGHT} ${INFO_WIDTH} + return + fi + fi + + HAS_WPA=`echo "${W_FLAGS}" | grep -E "WPA.*-PSK" | wc -l` + + log "${FUNCNAME[0]}" "HAS_WPA: \"${HAS_WPA}\"" + + ### This section will configure WPA-PSK or WPA2-PSK + if [ ${HAS_WPA} != "0" ]; then + PSK="" + PSK_LENGTH=${#PSK} + while [ ${PSK_LENGTH} -le 7 ]; do + eval "${DIALOG} --insecure --inputbox 'Please insert WPA PSK\n(8 characters)' \ + ${INFO_HEIGHT} ${INFO_WIDTH} 2> ${TMPFILE}" + if [ $? -eq 1 ]; then + eval "${DIALOG} --clear --msgbox 'Network configuration aborted!!!' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return 1 + fi + PSK=`<${TMPFILE}` + PSK_LENGTH=${#PSK} + done + + + NET_NUM=`wpa_cli -i ${DEVNAME} add_network | tail -1` + + log "${FUNCNAME[0]}" `wpa_cli -i ${DEVNAME} set_network ${NET_NUM} ssid "\"${W_ESSID}\""` + log "${FUNCNAME[0]}" `wpa_cli -i ${DEVNAME} set_network ${NET_NUM} psk \"${PSK}\"` + ## remove the password from tmpfile + echo "" > ${TMPFILE} + eval "${DIALOG} --clear --defaultno --yesno \ + 'Network \"${W_ESSID}\" added\nSave configuration file?' \ + ${INFO_HEIGHT} ${INFO_WIDTH} 2> ${TMPFILE}" + if [ $? -eq 0 ]; then + ## Save the config file + wifi_save_file ${DEVNAME} + fi + + eval "${DIALOG} --msgbox 'Network added successfully' ${INFO_HEIGHT} ${INFO_WIDTH}" + return 0 + fi + + HAS_ESS=`echo "${W_FLAGS}" | grep -E "ESS" | wc -l` + + log "_self" "HAS_ESS: \"${HAS_ESS}\"" + + if [ ${HAS_ESS} != "0" ]; then + NET_NUM=`wpa_cli -i ${DEVNAME} add_network | tail -1` + + log "_self" "NET_NUM: ${NET_NUM}" + log "_self" `wpa_cli -i ${DEVNAME} set_network ${NET_NUM} ssid "\"${W_ESSID}\""` + log "_self" `wpa_cli -i ${DEVNAME} set_network ${NET_NUM} key_mgmt NONE` + eval "${DIALOG} --clear --defaultno --yesno \ + 'Network \"${W_ESSID}\" added\nSave configuration file?' \ + ${INFO_HEIGHT} ${INFO_WIDTH} 2> ${TMPFILE}" + if [ $? -eq 0 ]; then + ## Save the config file + wifi_save_file ${DEVNAME} + fi + + return 0 + else + eval " ${DIALOG} --msgbox 'Error occurred!!!!' ${INFO_HEIGHT} ${INFO_WIDTH}" + return 0 + fi + + ## No available authentication methods.... + + eval "${DIALOG} --msgbox 'No supported authentication method for ${W_ESSID}'" + return 1 +} + + + + +## +## Configure a new connection from a list of available wi-fi networks +## + +function wifi_add(){ + + local DEVNAME=$1 + + wpa_cli -i ${DEVNAME} scan + eval "${DIALOG} --timeout 4 --msgbox 'Scanning for networks...' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + wpa_cli -i ${DEVNAME} scan_results | grep -E "^[0-9a-f][0-9a-f]:" | \ + sed -r -e 's/\t/|/g' |\ + sort -t "|" -r -n -k 3 > ${TMPFILE} + + wifinets=() + LAST_IFS=$IFS + IFS="|" + while read W_MAC W_FREQ W_STRNGT W_FLAGS W_ESSID; do + + log "_self" "W_ESSID: \"${W_ESSID}\"" + wifinets+=(${W_MAC} "${W_ESSID} -- ${W_FLAGS}") + done < ${TMPFILE} + IFS=${LAST_IFS} + + + log "$_self" "Wifi nets: \n${wifinets}\n===" + dialog --menu 'Select a network' ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 10 \ + "${wifinets[@]}" 2> ${TMPFILE} + if [ $? -eq 1 ]; then + return + fi + + W_MAC=$(cat ${TMPFILE}) + + + wifi_authenticate ${DEVNAME} ${W_MAC} + if [ $? -ne 0 ]; then + eval "${DIALOG} --msgbox 'Error while configuring ${DEVNAME}' " + fi + return $? +} + + +function wifi_save_file(){ + + local DEVNAME=$1 + + wpa_cli -i ${DEVNAME} save_config | tail -1 > ${TMPFILE} + SAVE_STATUS=`<${TMPFILE}` + if [ ${SAVE_STATUS} == "OK" ]; then + eval "${DIALOG} --msgbox 'Current configuration dumped to file ${WPA_FILE}' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + else + eval "${DIALOG} --msgbox 'Error while saving configuration to file ${WPA_FILE}' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi +} + +function wifi_remove(){ + + local DEVNAME=$1 + + wifi_network_list ${DEVNAME} + + eval "${DIALOG} --menu 'Select network to remove' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 10 ${NETLIST} \ + 2> ${TMPFILE}" + + if [ $? -eq 0 ]; then + ## a network has been selected + NETNUM=`<${TMPFILE}` + WPA_STATUS=`wpa_cli -i ${DEVNAME} remove_network ${NETNUM} | tail -1 ` + if [ ${WPA_STATUS} == "OK" ]; then + eval "${DIALOG} --clear --defaultno --yesno \ + 'Network ${NETNUM} removed\nSave configuration file?' \ + ${INFO_HEIGHT} ${INFO_WIDTH} 2> ${TMPFILE}" + if [ $? -eq 0 ]; then + ## Save the config file + wifi_save_file ${DEVNAME} + fi + + return + else + eval "${DIALOG} --clear --msgbox 'Network ${NETNUM} NOT removed' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + else + eval "${DIALOG} --clear --msgbox 'No network removed!!!' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + +} + + +function wifi_restart_wpa(){ + + local DEVNAME=$1 + local WPA_FILE=$2 + + WPA_PID=`ps ax | grep wpa_supplicant | grep " -i ${DEVNAME}" | +sed -r -e 's/^\ +//g' | cut -d " " -f 1` + + log "${FUNCNAME[0]}" "WPA_PID: ${WPA_PID}" + kill -n 9 ${WPA_PID} + + if [ $? -ne 0 ]; then + eval "${DIALOG} --clear --msgbox 'Error killing wpa_supplicant' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi + + wpa_supplicant -B -i ${DEVNAME} -c ${WPA_FILE} -P${WPA_PIDFILE} + WPA_PID=`ps ax | grep wpa_supplicant | grep " -i ${DEVNAME}" | cut -d " " -f 1 ` + WPA_PID_SAVED=`<${WPA_PIDFILE}` + if [ [ -n ${WPA_PID} ] || [ ${WPA_PID} != ${WPA_PID_SAVED} ] ]; then + eval "${DIALOG} --clear --msgbox 'Error restarting wpa_supplicant' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + else + eval "${DIALOG} --clear --msgbox 'wpa_supplicant restarted successfully' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi + +} + + + +## +## wifi_enable: show the list of configured networks, and enable the +## one the used has clicked on +## + +function wifi_enable(){ + + local DEVNAME=$1 + + wifi_network_list ${DEVNAME} + + eval "${DIALOG} --menu 'Select configured network' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 10 ${NETLIST} \ + 2> ${TMPFILE}" + + if [ $? -eq 0 ]; then + ## a network has been selected + NETNUM=`<${TMPFILE}` + WPA_STATUS=`wpa_cli -i ${DEVNAME} enable ${NETNUM} | tail -1 ` + if [ ${WPA_STATUS} == "OK" ]; then + eval "${DIALOG} --clear --msgbox 'Network ${NETNUM} enabled' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + config_ethernet ${DEVNAME} + return + else + eval "${DIALOG} --clear --msgbox 'Network ${NETNUM} NOT enabled' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + else + eval "${DIALOG} --clear --msgbox 'No network enabled!!!' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi +} + + +function wifi_disable(){ + + local DEVNAME=$1 + wifi_network_list ${DEVNAME} + eval "${DIALOG} --menu 'Select configured network' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 10 ${NETLIST} \ + 2> ${TMPFILE}" + + if [ $? -eq 0 ]; then + ## a network has been selected + NETNUM=`<${TMPFILE}` + WPA_STATUS=`wpa_cli -i ${DEVNAME} disable ${NETNUM} | tail -1 ` + if [ ${WPA_STATUS} == "OK" ]; then + eval "${DIALOG} --clear --msgbox 'Network ${NETNUM} disabled' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + else + eval "${DIALOG} --clear --msgbox 'Network ${NETNUM} NOT disabled' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + else + eval "${DIALOG} --clear --msgbox 'No network disabled!!!' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi +} + + + +function wifi_load_file(){ + + local DEVNAME=$1 + + eval "${DIALOG} --fselect ${WPA_FILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH} \ + 2>${TMPFILE}|" + + if [ $? -eq 0 ]; then + SEL_FILE=`<${TMPFILE}` + while [ -d ${SEL_FILE} ]; do + eval "${DIALOG} --fselect ${SEL_FILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH} \ + 2>${TMPFILE}" + if [ $? -eq 0 ]; then + SEL_FILE=`<${TMPFILE}` + else + eval "${DIALOG} --clear --infobox 'WPA_FILE was not modified' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + return + fi + done + + if [ -f ${SEL_FILE} ]; then + WPA_FILE=${SEL_FILE} + eval "${DIALOG} --clear --defaultno --yesno \ + 'WPA_FILE changed to ${WPA_FILE}\nRestart wpa_supplicant?' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + if [ $? -eq 0 ]; then + wifi_restart_wpa ${DEVNAME} ${WPA_FILE} + fi + else + eval "${DIALOG} --clear --infobox 'Invalid file name!\n WPA_FILE *not* changed' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + return + fi + else + eval "${DIALOG} --clear --infobox 'WPA_FILE was not modified' \ + ${INFO_HEIGHT} ${INFO_WIDTH}" + fi + +} + + + +function config_wifi(){ + + local DEVNAME=$1 + + while [ 1 -eq 1 ]; do + eval "${DIALOG} --clear --cancel-label 'Up' \ + --menu 'Configuring ${DEVNAME}\n(Current file: ${WPA_FILE})' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 12 \ + 'Restart' 'Restart wpa_supplicant' \ + 'Enable' 'Enable a configured network' \ + 'Disable' 'Disable a configured network' \ + 'Add' 'Configure a new network' \ + 'Remove' 'Delete an existing network' \ + 'Show' 'Show current configuration file' \ + 'Edit' 'Edit current configuration file' \ + 'Save' 'Save configuration to file'\ + 'Load' 'Load configuration from file'\ + 'New' 'Create new configuration file'\ + 2>${TMPFILE}" + if [ $? -eq 1 ]; then + return + fi + ACTION=`<${TMPFILE}` + case ${ACTION} in + "Restart") + ## Restart wpa_supplicant + wifi_restart_wpa ${DEVNAME} ${WPA_FILE} + ;; + "Enable") + wifi_enable ${DEVNAME} + ;; + "Disable") + wifi_disable ${DEVNAME} + ;; + "Add") + wifi_add ${DEVNAME} + ;; + "Remove") + wifi_remove ${DEVNAME} + ;; + "Show") + eval "${DIALOG} --title 'Current file: ${WPA_FILE}' \ + --textbox ${WPA_FILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + ;; + "Edit") + edit_file ${WPA_FILE} + ;; + "Save") + wifi_save_file ${DEVNAME} + ;; + "Load") + wifi_load_file ${DEVNAME} + ;; + "New") + eval "${DIALOG} --msgbox 'Sorry!Not yet implemented!' \ + ${INFO_HEIGHT} ${INFO_WIDTH} 2>${TMPFILE}" + ;; + esac + done + +} + + + +## +## (Re)-Configure a network device +## + +function configure_device(){ + + local DEVNAME=$1 + + case ${DEVNAME} in + eth*) + config_ethernet ${DEVNAME} + ;; + wlan*) + config_wifi ${DEVNAME} + ;; + *) + eval "${DIALOG} --clear --title 'ERROR' --msgbox \ + '${DEVNAME}: Unsupported device type' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + ;; + esac + + +} + + +function set_device_up(){ + + local DEVNAME=$1 + + ip link set ${DEVNAME} up + +} + +function set_device_down(){ + + local DEVNAME=$1 + + ip link set ${DEVNAME} down + +} + +function show_device_menu(){ + + local DEVNAME=$1 + while [ 1 -eq 1 ]; do + eval "${DIALOG} --clear --cancel-label 'Up' --menu 'Device: ${DEVNAME}' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 8 \ + 'View' 'View current configuration' \ + 'Conf' 'Configure device' \ + 'Start' 'Bring interface up' \ + 'Stop' 'Put interface down' \ + 'Restart' 'Restart interface' 2> ${TMPFILE}" + + if [ $? -eq 1 ]; then + return + fi + + DEV_ACTION=`<${TMPFILE}` + case ${DEV_ACTION} in + "View") + show_device_conf ${DEVNAME} + ;; + "Conf") + configure_device ${DEVNAME} + ;; + "Start") + set_device_up ${DEVNAME} + ;; + "Stop") + set_device_down ${DEVNAME} + ;; + "Restart") + set_device_down ${DEVNAME} + set_device_up ${DEVNAME} + ;; + *) + ;; + + esac + done +} + +## +## Show all the available network devices +## + +function show_devs() { + + DEVFILE=/proc/net/dev + DEVICES=`ip link show | awk 'NR % 2 == 1' | cut -d ":" -f 2` + + DEVICE_TAGS="" + + for i in `echo $DEVICES`; do + if [ $i != "lo" ]; then + DEVICE_TAGS="${DEVICE_TAGS} $i $i" + fi + done + + eval "${DIALOG} --clear --cancel-label 'Up' \ + --menu 'Select Interface to configure' ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 4 \ + ${DEVICE_TAGS} 2> ${TMPFILE}" + return $? +} + + +function dev_config_menu(){ + + while [ 1 -eq 1 ]; do + show_devs + if [ $? -eq 1 ]; then + return + fi + DEVNAME=`<${TMPFILE}` + show_device_menu ${DEVNAME} + done +} + +function show_info(){ + + cat < ${TMPFILE} + +== setnet.sh 0.1 == + +setnet.sh is a simple state-less tool to manage and configure network +interfaces. It is a shell wrapper around the functionalities of "ip", +"dhclient", "wpa_cli", and can be used to configure network +connections via Ethernet/Wi-Fi interfaces. + +Both Static and DHCP-based IP configuration is supported. + +At the moment, only WPA-PSK and open (no key) Wi-Fi connections are +available. + +EOF + eval "${DIALOG} --clear --cr-wrap --textbox ${TMPFILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + return +} + +function show_copyright(){ + + cat < ${TMPFILE} + +== setnet.sh 0.1 == + +(c) KatolaZ (katolaz@freaknet.org) -- 2016 + +EOF + eval "${DIALOG} --clear --cr-wrap --textbox ${TMPFILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + return +} + + +function show_license(){ + + cat < ${TMPFILE} + +== setnet.sh 0.1 == + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or (at +your option) any later version. + +This program is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + +---------------------------------------------------------------------- + + (c) KatolaZ -- 2016 + +---------------------------------------------------------------------- + +EOF + eval "${DIALOG} --clear --cr-wrap --textbox ${TMPFILE} ${WINDOW_HEIGHT} ${WINDOW_WIDTH}" + return +} + + + +function about_menu(){ + + while [ 1 -eq 1 ]; do + eval "${DIALOG} --cancel-label 'Up' --menu 'setnet ${VERSION} -- About' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 6 \ + 'Info' 'General information' \ + 'Copyright' 'Copyright information' \ + 'License' 'How to distribute this program' \ + 2> ${TMPFILE}" + if [ $? -eq 1 ];then + return; + fi + + ACTION=`<${TMPFILE}` + case ${ACTION} in + "Info") + show_info + ;; + "Copyright") + show_copyright + ;; + "License") + show_license + ;; + esac + done +} + + +function show_toplevel(){ + + eval "${DIALOG} --clear --cancel-label 'Quit' --menu 'Main Menu' \ + ${WINDOW_HEIGHT} ${WINDOW_WIDTH} 6 \ + 'Setup' 'Setup interfaces' \ + 'About' 'Info & Copyright' 2> ${TMPFILE}" + return $? +} + +function show_help(){ + + local SCRIPTNAME=$1 + echo "Usage: ${SCRIPTNAME} [OPTION]" + echo "Options:" + echo -e "\t -c cfg_file\tLoad configuration from cfg_file." + echo -e "\t -v\t\tPrint version number and exit. " + echo -e "\t -h\t\tShow this help." + +} + +function show_version(){ + + local SCRIPTNAME=$1 + echo "${SCRIPTNAME} -- version ${VERSION}" + echo "Copyright (C) Vincenzo \"KatolaZ\" Nicosia (katolaz@freaknet.org) -- 2016" + echo "This is free software. You can use and redistribute it under the " + echo "terms of the GNU General Public Licence version 3 or (at your option)" + echo "any later version." + echo + echo "YOU USE THIS SOFTWARE AT YOUR OWN RISK." + echo "There is ABSOLUTELY NO WARRANTY; not even for MERCHANTABILITY or" + echo "FITNESS FOR A PARTICULAR PURPOSE." +} + +function show_disclaimer(){ + + cat < ${TMPFILE} + + == setnet.sh 0.1 == + + (c) KatolaZ (katolaz@freaknet.org) -- 2016 + + -+- This is the alpha release of setnet.sh -+- + + THIS IS FREE SOFTWARE + YOU CAN USE AND DISTRIBUTE IT UNDER THE + TERMS OF THE GNU GENERAL PUBLIC LICENSE + + USE THIS SOFTWARE AT YOUR OWN RISK + + There is ABSOLUTELY NO WARRANTY; not even for + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE + + See "About" for more information about + copyright and license +EOF + + eval "${DIALOG} --clear --cr-wrap --textbox ${TMPFILE} 23 60" + return +} + + +function main(){ + + truncate -s 0 ${LOGFILE} + trap cleanup 0 $SIG_NONE $SIG_HUP $SIG_INT $SIG_TRAP $SIG_TERM + + show_disclaimer + + log "setnet" "Starting afresh on `date`" + SETNETRC=`realpath ${SETNETRC}` + log "main" "Using config file \"${SETNETRC}\"" + WPA_FILE=`realpath ${WPA_FILE}` + log "main" "Using WPA config file \"${WPA_FILE}\"" + LOFGILE=`realpath ${LOGFILE}` + log "main" "Using log file \"${LOGFILE}\"" + + while [ 1 -eq 1 ]; do + show_toplevel + if [ $? -eq 1 ]; then + cleanup + exit 1 + fi + ACTION=`<${TMPFILE}` + case ${ACTION} in + "Setup") + dev_config_menu + ;; + "About") + about_menu + ;; + esac + done + +} + + +## +## Get the options +## + +SETNETRC="" + +while getopts ":c:hv" opt; do + + case $opt in + c) + echo "Got option -c ${OPTARG}" + SETNETRC=`realpath ${OPTARG}` + echo "SETNETRC: ${SETNETRC}" + ;; + h) + show_help `basename $0` + exit 1 + ;; + v) + show_version `basename $0` + exit 1 + ;; + \?) + echo "Invalid option: -${OPTARG}" + exit 1 + ;; + :) + echo "Option -${OPTARG} requires an argument" + exit 1 + ;; + esac +done + + + +load_setnetrc ${SETNETRC} + +main + + diff --git a/debian_package/setnet-0.1/setnetrc b/debian_package/setnet-0.1/setnetrc new file mode 100644 index 0000000..d460eed --- /dev/null +++ b/debian_package/setnet-0.1/setnetrc @@ -0,0 +1,19 @@ +## +## +## setnetrc -- configuration file for setnet +## +## + +## +## The default configuration file for wpa_supplicant +## +WPA_FILE=/etc/wpa_supplicant/wpa_setnet.conf + + +## +## Logfile +## +LOGFILE=/var/log/setnet.log + + + diff --git a/debian_package/setnet-0.1/wpa_setnet.conf b/debian_package/setnet-0.1/wpa_setnet.conf new file mode 100644 index 0000000..07d4b6d --- /dev/null +++ b/debian_package/setnet-0.1/wpa_setnet.conf @@ -0,0 +1,3 @@ +ctrl_interface=/var/run/wpa_supplicant +update_config=1 + diff --git a/debian_package/setnet_0.1-1.debian.tar.xz b/debian_package/setnet_0.1-1.debian.tar.xz new file mode 100644 index 0000000..0c022a8 Binary files /dev/null and b/debian_package/setnet_0.1-1.debian.tar.xz differ diff --git a/debian_package/setnet_0.1-1.dsc b/debian_package/setnet_0.1-1.dsc new file mode 100644 index 0000000..c113165 --- /dev/null +++ b/debian_package/setnet_0.1-1.dsc @@ -0,0 +1,20 @@ +Format: 3.0 (quilt) +Source: setnet +Binary: setnet +Architecture: all +Version: 0.1-1 +Maintainer: Vincenzo (KatolaZ) Nicosia +Homepage: http://kalos.mine.nu/setnet +Standards-Version: 3.9.8 +Build-Depends: debhelper (>= 9) +Package-List: + setnet deb unknown optional arch=all +Checksums-Sha1: + a55b27f9d2ebec9680916348ca9770ea7b4d0589 14092 setnet_0.1.orig.tar.xz + 29f1f9c78aa25093fdc6ee9d5d4ae563d0eae109 8192 setnet_0.1-1.debian.tar.xz +Checksums-Sha256: + f80b75ec868e193b7a5ae636a7a4c8758fb6f09a7f4ebd76e6b0409f8b9521ab 14092 setnet_0.1.orig.tar.xz + 273e71160476bce4752643b6a7a243cd18984bbac5f5283db6703381131d7d5c 8192 setnet_0.1-1.debian.tar.xz +Files: + b6f0c6985260c5663d456e3f52ee409b 14092 setnet_0.1.orig.tar.xz + 6c2384edeaa47f02e2d6ebedf52a7023 8192 setnet_0.1-1.debian.tar.xz diff --git a/debian_package/setnet_0.1-1_all.deb b/debian_package/setnet_0.1-1_all.deb new file mode 100644 index 0000000..c7d237b Binary files /dev/null and b/debian_package/setnet_0.1-1_all.deb differ diff --git a/debian_package/setnet_0.1-1_amd64.changes b/debian_package/setnet_0.1-1_amd64.changes new file mode 100644 index 0000000..f3d3098 --- /dev/null +++ b/debian_package/setnet_0.1-1_amd64.changes @@ -0,0 +1,31 @@ +Format: 1.8 +Date: Fri, 30 Dec 2016 16:06:26 +0000 +Source: setnet +Binary: setnet +Architecture: source all +Version: 0.1-1 +Distribution: unstable +Urgency: medium +Maintainer: Vincenzo (KatolaZ) Nicosia +Changed-By: Vincenzo (KatolaZ) Nicosia +Description: + setnet - simple bash+dialog tool to configure networks +Changes: + setnet (0.1-1) unstable; urgency=medium + . + * Initial release (Closes: #nnnn) +Checksums-Sha1: + 0287d995e21fb9fbcd5d8bccc4c824b53f61edb0 800 setnet_0.1-1.dsc + a55b27f9d2ebec9680916348ca9770ea7b4d0589 14092 setnet_0.1.orig.tar.xz + 29f1f9c78aa25093fdc6ee9d5d4ae563d0eae109 8192 setnet_0.1-1.debian.tar.xz + b19640f028b439eef2de7ff6b4022c935d0f754d 8332 setnet_0.1-1_all.deb +Checksums-Sha256: + 7c044be42f6f7d383daec54bbe679f59c8b711cdeeb25f126b96248c114cd492 800 setnet_0.1-1.dsc + f80b75ec868e193b7a5ae636a7a4c8758fb6f09a7f4ebd76e6b0409f8b9521ab 14092 setnet_0.1.orig.tar.xz + 273e71160476bce4752643b6a7a243cd18984bbac5f5283db6703381131d7d5c 8192 setnet_0.1-1.debian.tar.xz + 24fadb3c5ed21d3c4dbf11cece2e70fcd9a3cde63dfd44c9154ff2c252939dfe 8332 setnet_0.1-1_all.deb +Files: + 9edeedf904abf7eebc00618d16a164d8 800 unknown optional setnet_0.1-1.dsc + b6f0c6985260c5663d456e3f52ee409b 14092 unknown optional setnet_0.1.orig.tar.xz + 6c2384edeaa47f02e2d6ebedf52a7023 8192 unknown optional setnet_0.1-1.debian.tar.xz + 816bb2dbcbc25011065051f31316ef9f 8332 unknown optional setnet_0.1-1_all.deb diff --git a/debian_package/setnet_0.1.orig.tar.xz b/debian_package/setnet_0.1.orig.tar.xz new file mode 100644 index 0000000..316aec0 Binary files /dev/null and b/debian_package/setnet_0.1.orig.tar.xz differ -- cgit v1.2.3